Texas Instruments LM5069MM-2

LM5069MM-2 Overview
In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package you will find it.1 channels are currently available.Tape & Reel (TR)-shaped packaging is used.There are 10 terminations in total.This device has a terminal position of DUAL.A total of 10 pins are present on it.The supply voltage 48V is necessary for high efficiency.Surface Mount is set up this way.Electric components of this type are classified as Hot Swap Controller.A temperature setting of -40°C~125°C will ensure reliable operation.General Purpose applications can be downloaded from the device.The article appears in Auto Retry.If the power source is 9V~80VV, it should work fine.Hot-swappable device is included in the LM5069 family of numbers.This device operates by using 10 pins.As far as Power Management Circuits is concerned, this gadget is self-contained.Current Limit, Fault Timeout, OVP, UVLO is the number of features it can be programmed with.In the present, there is a shortage of 1.3mA.As you can see, it is positioned in the direction of Surface Mount.In order for a device to operate normally, the supply voltage (Vsup) must be higher than 9V.Hot-swappable device is important to note that the part has a power supply 48V.There is no problem with a 12V output voltage if you want high efficiency.

LM5069MM-2 Features
The terminal position of 10
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, UVLO
Output voltage of 12V

LM5069MM-2 Applications
There are a lot of Texas Instruments LM5069MM-2 hot swap controllers applications.

Power supply hotswap & inrush control
Base station power distribution system
Telecom server
Reverse current protection
Backplane
Current limit and current foldback limit functions
CompactPCI
Short-circuit protection in real time
Circuit power protectors
Firewire