Texas Instruments LM393ADR

LM393ADR Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.Output type of this comparator is CMOS, MOS, Open-Drain, TTL .Electronic comparator is shipped by Cut Tape (CT) .You can find 8 terminals of the comparator.The chip belongs to Comparator .With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as Differential .The total number of elements is 2 .The device contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to 0°C~70°C to avoid mal-function.Electronic comparator has 8 pins.In order to find a solution that meets your specific needs, search LM393 for more pin-to-pin solutions.In this comparator, the quiescent current is 2.5mA .There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 600μA .A supply current exceeding 500μA may result in the comparator malfunctioning.5/30V power supplies are enough to run the device.You can input a maximum current of 250nA into this device.From the voltage formula, the voltage gain of the part is 106.02dB .Packed in TR , this device is for general uses (often in ADC circuits).

LM393ADR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

LM393ADR Applications
There are a lot of Texas Instruments LM393ADR linear comparators applications.

General-Purpose, Low-Voltage Applications
Set Top Boxes
Wireless Base Stations
Pulse, Squarewave, and Time Delay Generators
Simple Analog-to-Digital Converters (ADCs)
Window Comparators
High-Speed Sampling Circuits
Battery-Powered Electronics
Portable and Battery-Powered Systems
Wearable Devices