Texas Instruments LM2595S-ADJ/NOPB

Description
The LM2595 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 1A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5V, 12V, and an adjustable output version.
Requiring a minimum number of external components, these regulators are simple to use and include internal frequency compensation and a fixed-frequency oscillator. The LM2595 series operates at a switching frequency of 150 kHz, thus allowing smaller sized filter components than what would be needed with lower frequency switching regulators. Available in a standard 5-lead TO-220 package with several different lead bend options, and a 5-lead TO-263 surface mount package. Typically, for output voltages less than 12V, and ambient temperatures less than 50°C, no heat sink is required.
A standard series of inductors are available from several different manufacturers optimized for use with the LM2595 series. This feature greatly simplifies the design of switch-mode power supplies.
Other features include an ensured ±4% tolerance on output voltage under specified input voltage and output load conditions, and ±15% on the oscillator frequency. External shutdown is included, featuring typically 85 μA stand-by current. Self protection features include a two stage frequency reducing current limit for the output switch and an overtemperature shutdown for complete protection under fault conditions.

Features
Check for Samples: LM2595 3.3V, 5V, 12V, and Adjustable Output Versions.
Adjustable Version Output Voltage Range, 1.2V to 37V ±4% Max Over Line and Load Conditions.
Available in TO-220 and TO-263 (Surface Mount) Packages
Ensured 1A Output Load Current
Input Voltage Range Up to 40V
Requires Only 4 External Components
Excellent Line and Load Regulation Specifications
150 kHz Fixed Frequency Internal Oscillator
TTL Shutdown Capability
Low Power Standby Mode, I_O Typically 85 μA
High Efficiency
Uses Readily Available Standard Inductors
Thermal Shutdown and Current Limit Protection

Applications
Simple High-Efficiency Step-Down (Buck) Regulator
Efficient Pre-Regulator for Linear Regulators
On-Card Switching Regulators
Positive to Negative Converter