STMicroelectronics LD1117STR

LD1117STR Overview
In the case of Tape & Reel (TR) cases, the regulater IC is delivered. This voltage regulator IC comes in a TO-261-4, TO-261AA case. On the Linear IC itself, there are 4 terminations. The IC chip's output type is Adjustable. Linear IC consists of 1 battery regulators. The range of operating temperatures of Surface Mount are programmable in the Voltage Regulator Chip, so that the temperature can be varied as desired. The IC voltage regulator must be maintained at 0°C~125°C degrees for it to function. There is one output function configured for this voltage regulator IC, and that is Positive. In terms of its current output, it is able to supply 800mA. As you can see, the regulator IC has a total of 3 pins. As a result of this IC voltage regulator's 1 outputs, it ensures prompt, adequate performance for all your applications. The dropout voltage of the regulator IC is 10 volts. Several pins on the chip are 3-shaped. As an FYI, this IC voltage regulator has the basic part number LD1117. Packing the voltage regulator IC is done in a method called TR, 7 INCH. There is a maximum output current of 1.3A for this regulator to meet the operational requirements. It operates in the 10mA Quiescent Current state. The top supply voltage can be set to 15V volts.

LD1117STR Features
1.1V dropout voltage
TR, 7 INCH method of packing

LD1117STR Applications
There are a lot of STMicroelectronics LD1117STR Linear Voltage Regulators applications.

Bypass circuit
SMPS (Switching-Mode Power Supply)
TVS diodes
Semi-automation
HVAC (Heating, Ventilation, and Air Conditioning)
Battery-powered device
Multiple-power supply system
CAV (Connected and Automated Vehicle)
EPS (Electric Power Steering)
ADAS (Advanced Driver-Assistance System)