LD1117S18CTR

• Factory Lead Time
  8 Weeks
• Lifecycle Status
  ACTIVE (Last Updated: 6 months ago)
• Mount
  Surface Mount
• Mounting Type
  Surface Mount
• Package / Case
  TO-261-4, TO-261AA
• Number of Pins
  3
• Operating Temperature
  -40°C~125°C
• Packaging
  Tape & Reel (TR)
• JESD-609 Code
  e3
• Part Status
  Active
• Moisture Sensitivity Level (MSL)
  1 (Unlimited)
• Number of Terminations
  4
• ECCN Code
  EAR99
• Terminal Finish
  Matte Tin (Sn)
• Packing Method
  TR, 7 INCH
• Max Power Dissipation
  12W
• Technology
  BIPOLAR
• Terminal Position
  DUAL
• Terminal Form
  GULL WING
• Number of Functions
  1
• Base Part Number
  LD1117
• Pin Count
  4
• JESD-30 Code
  R-PDSO-G4
• Number of Outputs
  1
• Voltage - Input (Max)
  15V
• Output Voltage
  1.8V
• Output Type
  Fixed
• Max Output Current
  1.3A
• Output Configuration
  Positive
• Power Dissipation
  12W
• Current - Output
  800mA
• Quiescent Current
  10mA
• Accuracy
  1 %
• Output Voltage 1
  1.8V
• Number of Regulators
  1
• Protection Features
  Over Current, Over Temperature
• Voltage Dropout (Max)
  1.3V @ 800mA
• PSRR
  75dB (120Hz)
• Dropout Voltage
  1.1V
• Min Output Voltage
  1.8V
• Voltage Tolerance-Max
  2%
• Nominal Output Voltage
  1.8V
• Input Bias Current
  5mA
• Output Voltage Accuracy
  1 %
• Height
  1.8mm
• Length
  6.5mm
• Width
  3.5mm
• Radiation Hardening
  No
• REACH SVHC
  No SVHC
• RoHS Status
  ROHS3 Compliant
• Lead Free
  Lead Free

LD1117S18CTR Overview
This Voltage Regulator IC comes inTape & Reel (TR) packaging. This voltage regulator IC comes in a TO-261-4, TO-261AA case. This gadget has 4 terminations on it, each with a different function. Fixed is the output type of the Voltage Regulator IC. This component features 1 Voltage regulators. As a result of the Linear Voltage Regulator's design, the operating temperature of Surface Mount can be adjusted within a specified range. The IC Regulator is set to operate at -40°C~125°C degrees. Currently, this regulator IC has an output function configured as Positive as its output function. There is an output of 800mA at the moment. There are totally 4 pins on this chip. It has 1 outputs to ensure that the performance of this regulator is prompt and sufficient. In terms of its dropout voltage, it is 10 volts. There are 3 pins on the chip. FYI, the basic part number for this IC regulator is LD1117. Packing the voltage regulator IC is done in a method called TR, 7 INCH. A maximum output current of 1.3A is required to meet the operation requirements. It operates in the 10mA Quiescent Current state.

LD1117S18CTR Features
1.1V dropout voltage
TR, 7 INCH method of packing

LD1117S18CTR Applications
There are a lot of STMicroelectronics LD1117S18CTR Linear Voltage Regulators applications.

CAV (Connected and Automated Vehicle)
Switching regulator
Battery-powered device
Disk drivers
IO devices
Servers
PLL (Phase-Locked Loop)
Wireless charge devices
Quick charge protocols
Measurement and control euipment