LD1117DTTR

• Factory Lead Time
  24 Weeks
• Mount
  Surface Mount
• Mounting Type
  Surface Mount
• Package / Case
  TO-252-3, DPak (2 Leads Tab), SC-63
• Number of Pins
  3
• Weight
  4.535924g
• Operating Temperature
  0°C~125°C
• Packaging
  Tape & Reel (TR)
• JESD-609 Code
  e3
• Part Status
  Active
• Moisture Sensitivity Level (MSL)
  1 (Unlimited)
• Number of Terminations
  3
• Termination
  SMD/SMT
• ECCN Code
  EAR99
• Terminal Finish
  Matte Tin (Sn) - annealed
• Max Power Dissipation
  12W
• Technology
  BIPOLAR
• Terminal Position
  SINGLE
• Terminal Form
  GULL WING
• Peak Reflow Temperature (Cel)
  260
• Number of Functions
  1
• Terminal Pitch
  2.28mm
• Reflow Temperature-Max (s)
  30
• Base Part Number
  LD1117
• Pin Count
  3
• Number of Outputs
  1
• Output Voltage
  15V
• Output Type
  Adjustable
• Max Output Current
  1.3A
• Max Supply Voltage
  15V
• Output Configuration
  Positive
• Power Dissipation
  12W
• Current - Output
  800mA
• Quiescent Current
  10mA
• Accuracy
  1 %
• Max Output Voltage
  15V
• Number of Regulators
  1
• Protection Features
  Over Current, Over Temperature
• Voltage Dropout (Max)
  1.2V @ 800mA
• PSRR
  75dB (120Hz)
• Reference Voltage
  1.262V
• Dropout Voltage
  1.1V
• Dropout Voltage1-Nom
  1.1V
• Min Output Voltage
  1.25V
• Input Bias Current
  5mA
• Output Voltage Accuracy
  1 %
• Load Regulation-Max(%)
  0.4%
• Height
  2.4mm
• Length
  6.6mm
• Width
  6.2mm
• Radiation Hardening
  No
• REACH SVHC
  No SVHC
• RoHS Status
  ROHS3 Compliant
• Lead Free
  Lead Free

LD1117DTTR Overview
Tape & Reel (TR) cases are used for delivery. This battery regulator is contained in a TO-252-3, DPak (2 Leads Tab), SC-63 package. In total, there are 3 terminations on the gadget. Regulator IC chip's output type is Adjustable. This electronic component implements 1 regulators. In this Regulator IC chip, the operating temperature of Surface Mount varies. In order for this IC voltage regulator to operate, the temperature has to be kept at 0°C~125°C degrees. This regulator's output function is configured to be Positive. There is a current output of 800mA from this regulator IC. On this chip, there are a total of 3 pins in total. In order to deliver prompt, sufficient and reliable performance, this regulator IC has 1 outputs in total. The dropout voltage of the regulator IC is 10 volts. Chips have 3 pins. It is LD1117 for this voltage regulator IC, just for your information. There is a maximum output current of 1.3A for this regulator to meet the operational requirements. It operates in the 10mA Quiescent Current state. The top supply voltage can be set to 15V volts.

LD1117DTTR Features
1.1V dropout voltage

LD1117DTTR Applications
There are a lot of STMicroelectronics LD1117DTTR Linear Voltage Regulators applications.

Wired/Wireless audio systems
Timing and clock ICs
TVS diodes
Smart buildings
Camera
Servers
Car wiper
Hot swap controller
eBike
SoC