STMicroelectronics LD1086V25

Fixed Positive LDO Regulator, 2.5V, 1.5V Dropout, BIPolar, PSFM3
V REG LDO 2.5V, 1086, TO-220-3; Voltage Regulator Type:Positive Fixed LDO; Voltage, Input Max:30V; Voltage, Output Max:2.5V; Output Current Max:1.5A; Voltage, Dropout:1.3V; Percentage Accuracy:1%; Outputs, No. of:1; Voltage, Supply ;RoHS Compliant: Yes
IC, V REG LDO 2.5V, 1086, TO-220-3; Output Type: Fixed; Input Voltage Min: 3.8V; Input Voltage Max: 30V; Adjustable Output Voltage Min: -; Adjustable Output Voltage Max: -; LDO Regulator Case Style: TO-220; No. of Pins: 3Pins; Operating Temperature Min: -40°C; Operating Temperature Max: 125°C; Product Range: -; MSL: -; SVHC: No SVHC (17-Dec-2015); Base Number: 1086; Device Marking: LD1086V25; IC Generic Number: 1086; Operating Temperature Range: -40°C to 125°C; Operating Voltage Tolerance : 1%; Output Current Max: 1.5A; Supply Voltage Max: 30V; Voltage Regulator Type: Positive Fixed LDO
The LD1086 is a LOW DROP Voltage Regulator able to provide up to 1.5A of output current. Dropout is guaranteed at a maximum of 1.2V at the maximum output current, decreasing at lower loads. The LD1086 is pin to pin compatible with the older 3-terminal adjustable regulators, but has better performances in term of drop and output tolerance. A 2.85V output version is suitable for SCSI-2 active termination. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the LD1086 quiescent current flows into the load, so increase efficiency. Only a 10uF minimum capacitor is need for stability. The device is supplied in TO-220, D2PAK, D 2PAK/A and DPAK. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within -1% at 25oC.