ISPPAC-CLK5620AV-01TN100C

Lattice Semiconductor Corporation ISPPAC-CLK5620AV-01TN100C

Part Number:
ISPPAC-CLK5620AV-01TN100C
Manufacturer:
Lattice Semiconductor Corporation
Ventron No:
3116563-ISPPAC-CLK5620AV-01TN100C
Description:
IC CLOCK PROGRAM BUFFER 100TQFP
ECAD Model:
Datasheet:
ISPPAC-CLK5620AV-01TN100C

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Lattice Semiconductor Corporation ISPPAC-CLK5620AV-01TN100C technical specifications, attributes, parameters and parts with similar specifications to Lattice Semiconductor Corporation ISPPAC-CLK5620AV-01TN100C.
  • Factory Lead Time
    8 Weeks
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    100-LQFP
  • Number of Pins
    100
  • Operating Temperature
    0°C~70°C
  • Packaging
    Tray
  • Published
    2000
  • Series
    ispClock™
  • JESD-609 Code
    e3
  • Pbfree Code
    yes
  • Part Status
    Obsolete
  • Moisture Sensitivity Level (MSL)
    3 (168 Hours)
  • Number of Terminations
    100
  • ECCN Code
    EAR99
  • Terminal Finish
    Matte Tin (Sn)
  • Subcategory
    Clock Drivers
  • Max Power Dissipation
    1.75W
  • Voltage - Supply
    3V~3.6V
  • Terminal Position
    QUAD
  • Terminal Form
    GULL WING
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    1
  • Supply Voltage
    3.3V
  • Terminal Pitch
    0.5mm
  • Frequency
    20MHz
  • Reflow Temperature-Max (s)
    40
  • Base Part Number
    ISPPAC-CLK5620A
  • Output
    EHSTL, HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL
  • Pin Count
    100
  • Number of Outputs
    20
  • Operating Supply Voltage
    3.3V
  • Supply Voltage-Max (Vsup)
    3.6V
  • Supply Voltage-Min (Vsup)
    3V
  • Number of Circuits
    1
  • Nominal Supply Current
    7mA
  • Frequency (Max)
    400MHz
  • Family
    5600
  • Input
    HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL
  • Ratio - Input:Output
    2:20
  • Logic IC Type
    PLL BASED CLOCK DRIVER
  • PLL
    Yes with Bypass
  • Differential - Input:Output
    Yes/Yes
  • Propagation Delay (tpd)
    8.8 ns
  • Divider/Multiplier
    Yes/No
  • fmax-Min
    400 MHz
  • Same Edge Skew-Max (tskwd)
    0.05 ns
  • Radiation Hardening
    No
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Lead Free
Description
ISPPAC-CLK5620AV-01TN100C Overview
It is packaged using the Tray method since it is a clock IC. This clock generator is embedded in the 100-LQFP package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are 100 terminations found in this file. Clock generator ics require a voltage of 3.3V. There is a Clock PLL called HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL which is designed to be the input to this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. This clock-based frequency generator provides a frequency up to 400MHz Max. Because of the Surface Mount, clock PLL can be easily mounted on the panel. It would be possible to supply this clock PLL with 3.6V of power. For safety reasons, this frequency generator's supply voltage should remain above 3V. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. In this case, we are dealing with a frequency synthesizer that can be used with EHSTL, HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL logic levels. It is a 100-bit clock PLL designed specifically for microprocessors. According to the base part number, its related parts can be founded. The frequency synthesizer has 100 pins that are available. The maximum supply voltage that analog clock generator can handle is 3.3V. In general, this clock PLL is considered a Clock Drivers device. This electronic part is a member of the ispClock? series. The output frequency can be amplified as high as possible with its 20 signal outputs. At maximum 0.05 ns, this analog clock generator has low timing skew. You can find similar clock generators by searching for the 5600 family. The PLL BASED CLOCK DRIVER logic circuits primarily use this clock device. High efficiency is achieved when operating at a frequency of 20MHz.

ISPPAC-CLK5620AV-01TN100C Features
Available in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

ISPPAC-CLK5620AV-01TN100C Applications
There are a lot of Lattice Semiconductor Corporation ISPPAC-CLK5620AV-01TN100C Clock Generators applications.

Quenching?
CB radios
Radio receivers
Antenna automatic tracking
Digital switching systems
DVD recorders
Pagers
Cell phones
Ports
Navigation, positioning and surveillance system for aircraft, ships and ships
ISPPAC-CLK5620AV-01TN100C More Descriptions
ispClock 5600A Series 3.6 V 400 MHz Zero Delay Programmable PLL Clock - TQFP-100
Zero Delay Programmable PLL Clock Generator Single 8MHz to 400MHz 100-Pin TQFP
HSTL LVCMOS LVDS LVPECL LVTTL SSTL 100-LQFP ISPPAC-CLK5620A PLL BASED CLOCK DRIVER clock generator circuit 3.6V 400MHz 7mA 1.75W
CLOCK GENERATOR, ISP, SMD, TQFP100; Voltage, Supply Min:3V; Voltage, Supply Max:3.6V; Termination Type:SMD; Case Style:TQFP; No. of Pins:100; Operating Temperature Range:0°C to 70°C; Temp, Op. Max:70°C; Temp, Op. Min:0°C; Base Number:5620; Voltage, Vcc:3.3V; Clock Frequency:20MHz
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.