Texas Instruments INA282AQDRQ1

INA282AQDRQ1 Overview
Buck boost converter is embedded in the Tape & Reel (TR) package.8-SOIC (0.154, 3.90mm Width) has packaged voltage regulator in this manner.In this case, Surface Mount holds the current regulator in place.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.An input voltage wcurrent regulatorh a value of -14V~80V may be used as an input voltage.In addition to the 8 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.Current regulator belongs to the family INA282.In computers and other communication constant current regulators, 8 pins are pronged contacts that form part of a signal interface.The current regulator is mounted on the Surface Mount axis.Compared to the last few years, the number of channels has grown strong/weak: 1.There is a maximum voltage to be supplied to 18V by it.In this case, these current regulations are included as part of a part called Operational Amplifier.As long as the supply voltage is lower than 2.7V, it will operate correctly.A type of FPGA that falls under this category is the Automotive, AEC-Q100, Zero-Drift series.This electrical buck boost converter has a OPERATIONAL AMPLIFIER amplifier type.In a current regulation, 33.98dB voltage gains are the simple ratio between the output voltage and the input voltage.The resistance of the electrical dc to dc converter is 6kOhm (Ω).

INA282AQDRQ1 Features
Tape & Reel (TR) package
INA282 family
The maximal supply voltage of 18V
Automotive, AEC-Q100, Zero-Drift series

INA282AQDRQ1 Applications
There are a lot of Texas Instruments INA282AQDRQ1 Current Regulation/Managements applications.

Vehicle dynamic controls
Industrial applications current measurement
Engine management
Motor controls
Power management
DC motor control
Battery chargers
Over-current protection
Over current monitor
Power supply current measurement