Texas Instruments INA2128UAG4

INA2128UAG4 Overview
The linear amplifier is packaged in a SOIC case. This is a INSTRUMENTATION AMPLIFIER type op amp. During the past two weeks, there have been close to 16 terminations. The total number of pins on linear amplifier is 16. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Instrumentation Amplifier device. In total, the buffer amplifier consists of 16 pins. The input offset voltage is 25μV. This op amp can operate from a supply current at 1.4mA. There should be no change in the voltage gain. Op amp ic has 2 channels. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. Use op amp only at temperatures no higher than 85°C. 6 elements make up the design of this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 36V, which is suitable. In order to ensure that the instrumentation amplifier's supply voltage remains above 4.5V, it is recommended to keep it higher. This electronic part should be conducted with a dual supply voltage of 18V volts for this part. There is a quiescent current of 700μA in this operational amplifier circuit. It is important that the linear amplifier resistance stays within the range of 100GOhm.


INA2128UAG4 Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm

INA2128UAG4 Applications
There are a lot of Texas Instruments INA2128UAG4 Instrumentational OP Amps applications.

Band-pass filter
Video data acquisition
Communication
Weak signal detection
PDA
Signal transformation
Hand-held batteries
Comparator
Precision measurement
Video amplifiers