Texas Instruments INA207AIDG4

INA207AIDG4 Overview
Buck boost converter is embedded in the Tube package.In the same manner as 14-SOIC (0.154, 3.90mm Width), voltage regulator is packaged.Surface Mount is used to mount this current regulator on the board.Temperatures should not exceed -40°C~125°C during operation.As far as input voltage goes, current regulator supports the value of -16V~80V.An example of this is the 14 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.Current regulator belongs to INA207 family.14-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.Surface Mount is responsible for mounting this current regulator.Providing the constant current is powered by a 12VV power source, the constant current should be able to function.In addition to the maximum design flexibility that 1mA provides, its output current is also quite high.There is a maximum voltage to be supplied to 18V by it.Operational Amplifier, which is a part that contains all of these current regulations, is included in this part.As long as the supply voltage is lower than 2.7V, it will operate correctly.This electrical buck boost converter is an amplifier of type COMPARATOR.A 12V power supply is used to power the boost converter.

INA207AIDG4 Features
Tube package
INA207 family
The maximal supply voltage of 18V
12V power supplies

INA207AIDG4 Applications
There are a lot of Texas Instruments INA207AIDG4 Current Regulation/Managements applications.

Diesel injection controls
Smart battery packs
Over-current measurement
Over-current protection
Transmission controls
Battery management
Current sensing
Over current monitor
Suspension controls
Battery chargers