Texas Instruments INA168NA/3KG4

INA168NA/3KG4 Overview
Buck boost converter is part of the package Tape & Reel (TR).In the same manner as SC-74A, SOT-753, voltage regulator is packaged.Surface Mount is used to mount this current regulator on the board.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.There is a support for voltages of 2.7V~60V as input voltages for this voltage regulator.In the case of 5 terminations, which are the practice of terminating a transmission line with a voltage regulator that has the same characteristic impedance as the line itself, they are fairly common.This is a member of the INA168 family.Computers or other communication constant current regulators have 5 pins, which are pronged contacts.Using Surface Mount as a mounting system, this current regulator is mounted.Channels are becoming stronger/weaker based on the following statistics: 1.The maximum voltage of 36V that can be supplied to the buck boost converter is supported.Part Operational Amplifier consists of these current regulations as well as other current regulations.A minimum supply voltage of 2.7V is required for its operation.This electrical buck boost converter has a OPERATIONAL AMPLIFIER amplifier type.

INA168NA/3KG4 Features
Tape & Reel (TR) package
INA168 family
The maximal supply voltage of 36V

INA168NA/3KG4 Applications
There are a lot of Texas Instruments INA168NA/3KG4 Current Regulation/Managements applications.

Current sensing
Power management
DC-to-dc converters
Industrial applications current measurement
Smart battery packs
Motor controls
Over-current measurement
Automotive current measurement
Over current monitor
Transmission controls