Texas Instruments INA157UA

INA157UA Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a Differential-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 100μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 2.4mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 6.02dB. This op amp ic has 1 circuits. There are a total of 2 channels available on the op amps. The quiescent current is 2.4mA. It is important that the op amp resistance stays within the range of 24kOhm. This linear amplifier also utiliANALOG CIRCUITes an analog IC known as a ANALOG CIRCUIT.

INA157UA Features
8 Pins
supply voltage of 15V
6.02dB voltage gain
Resistance of 24kOhm


INA157UA Applications
There are a lot of Texas Instruments
INA157UA Instrumentational OP Amps applications.


Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering