Texas Instruments INA132UAE4

INA132UAE4 Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 750μV for input offset voltage. A supply current of 160μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 0dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 1 elements in this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 36V, which is suitable. Keeping the linear amplifier's supply voltage above 2.7V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 18V volts. The quiescent current is 160μA. It is important that the op amp resistance stays within the range of 80kOhm. This linear amplifier also utiliANALOG CIRCUITes an analog IC known as a ANALOG CIRCUIT. This buffer op amp has the following extra benefit: IT CAN ALSO OPERATE WITH 2.7V TO 36V SINGLE SUPPLY.

INA132UAE4 Features
8 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 80kOhm


INA132UAE4 Applications
There are a lot of Texas Instruments
INA132UAE4 Instrumentational OP Amps applications.


Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering