Altera EPM3128ATC100-7N

EPM3128ATC100-7N Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is embedded in the TQFP package.As you can see, this device has 80 I/O ports programmed into it.The device is programmed with 100 terminations.The terminal position of this electrical component is QUAD.It is powered from a supply voltage of 3.3V.It is a part of the family [0].It is equipped with 100 pin count.This device can also display [0].For digital circuits, there are 2500gates. These devices serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.It is mounted by Surface Mount.It is designed with 100 pins.It operates at a maximum supply voltage of 3.6V volts.Initially, it requires a voltage of 3Vas the minimum supply voltage.This can be achieved at a frequency of 192.3MHz.In order to operate properly, the operating temperature should be higher than 0°C.There should be a temperature below 70°Cat the time of operation.It is composed of 8 logic blocks (LABs).It is recommended that the maximal frequency be lower than 192.3MHz.A programmable logic type is categorized as EE PLD.

EPM3128ATC100-7N Features
TQFP package
80 I/Os
100 pin count
100 pins
8 logic blocks (LABs)

EPM3128ATC100-7N Applications
There are a lot of Altera EPM3128ATC100-7N CPLDs applications.

Digital systems
Wireless Infrastructure Base Band Unit and Remote Radio Unit
Timing control
PULSE WIDTH MODULATION (PWM)
Power up sequencing
Address decoding
Power Meter SMPS
STANDARD SERIAL INTERFACE UART
Multiple Clock Source Selection
Handheld digital devices