Analog Devices Inc. ADM809-5SAKS-REEL

ADM809-5SAKS-REEL Overview
As you can see, this power management is mounted through 3 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes SC-70, SOT-323 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 240. When 3.3V is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 3 pins that are attached to IC management. This power management has 3 pins. Supply voltage (Vsup) should be at least 1V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~150°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a 60μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using ADM809, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 50μA. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.

ADM809-5SAKS-REEL Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current


ADM809-5SAKS-REEL Applications
There are a lot of Analog Devices Inc.
ADM809-5SAKS-REEL Voltage Supervisors applications.


emergency room
Medical-specific isolation transformer
Medical-specific insulation monitor
Transformer load monitoring equipment
External alarm
Display equipment
DC stabilized power supply module
Insulation fault location system
Magnetic resonance imaging
Stable power system