ADM3310EARU-REEL

ADI ADM3310EARU-REEL

Part Number:
ADM3310EARU-REEL
Manufacturer:
ADI
Ventron No:
5149838-ADM3310EARU-REEL
Description:
15 kV ESD Protected, 2.7 V to 3.6 V Serial Port Transceivers with Green Idle?
ECAD Model:
Datasheet:
ADM3307E/10E-12E/15E

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
ADI ADM3310EARU-REEL technical specifications, attributes, parameters and parts with similar specifications to ADI ADM3310EARU-REEL.
  • Surface Mount
    YES
  • JESD-609 Code
    e0
  • Pbfree Code
    no
  • Part Status
    Obsolete
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    28
  • Terminal Finish
    TIN LEAD
  • Technology
    CMOS
  • Terminal Position
    DUAL
  • Terminal Form
    GULL WING
  • Peak Reflow Temperature (Cel)
    240
  • Number of Functions
    3
  • Supply Voltage
    3.3V
  • Terminal Pitch
    0.65mm
  • Time@Peak Reflow Temperature-Max (s)
    30
  • Pin Count
    28
  • JESD-30 Code
    R-PDSO-G28
  • Operating Temperature (Max)
    85°C
  • Operating Temperature (Min)
    -40°C
  • Supply Voltage-Max (Vsup)
    3.6V
  • Temperature Grade
    INDUSTRIAL
  • Supply Voltage-Min (Vsup)
    2.7V
  • Differential Output
    NO
  • Input Characteristics
    SCHMITT TRIGGER
  • Interface IC Type
    LINE TRANSCEIVER
  • Driver Number of Bits
    3
  • Receiver Number of Bits
    5
  • Interface Standard
    EIA-232
  • Receive Delay-Max
    1000 ns
  • Length
    9.7mm
  • Height Seated (Max)
    1.2mm
  • Width
    4.4mm
  • RoHS Status
    Non-RoHS Compliant
Description
ADM3310EARU-REEL Overview
There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.As a result of the ic receiver, the resolution of the driver was increased to 3 bits.As a rule of thumb, this receiver is typically specified with a resolution of 5 bits.IC receiver has an interface IC type called LINE TRANSCEIVER, which controls and manages the sharing of data.Driver ICs aren't allowed to operate above 85°C.In order to get the best performance, this transceiver module should be handled with a voltage lower than 3.6V.The voltage supply should be at least 2.7V for this module isolated transceiver to operate.It is recommended that the operating temperature be above -40°C.

ADM3310EARU-REEL Features
28 pin count


ADM3310EARU-REEL Applications
There are a lot of Rochester Electronics, LLC
ADM3310EARU-REEL Drivers/Receivers/Transceivers applications.


Wireless network systems
Satellite communications networks
Ethernet circuitry
Wired telephone
Cordless telephone
Desktop PC
Notebook
Pocket PC
Desktop radio
Clock radio
ADM3310EARU-REEL More Descriptions
R-PDSO-G28 EIA-232 TIN LEAD Obsolete interface driver 3.3V 9.7mm 1000ns 85C
Triple Transmitter Quint Receiver RS-232 28-Pin TSSOP T/R
IC TRANSCEIVER FULL 3/5 28TSSOP
35mA mAAudio Amplifiers4.4mm mm28 pinsTSSOP
ULTRA-SMALL, ADJUSTABLE SEQUENCING/SUPERVISORY CIRCUITS
15KV ESD 2.7V TO 3.6V S P T I.C.
The ADM33xxE line of driver/receiver products is designed to fully meet the EIA-232 standard while operating with a single 2.7 V to 3.6 V power supply. The devices feature an on-board charge pump dc-to-dc converter, eliminating the need for dual power supplies. This dc-to-dc converter contains a voltage tripler and a voltage inverter that internally generates positive and negative supplies from the input 3 V power supply. The dcto-dc converter operates in Green Idle mode, whereby the charge pump oscillator is gated on and off to maintain the output voltage at -7.25 V under varying load conditions. This minimizes the power consumption and makes these products ideal for battery-powered portable devices. The ADM33xxE devices are suitable for operation in harsh electrical environments and contain ESD protection up to -15 kV on their RS-232 lines (ADM3310E, ADM3311E, ADM3312E, and ADM3315E). The ADM3307E contains ESD protection up to -15 kV on all I/O lines (CMOS, RS-232, EN, and SD). A shutdown facility that reduces the power consumption to 66 nW is also provided. While in shutdown, one receiver remains active (two receivers active with ADM3310E), thereby allowing monitor-ing of peripheral devices. This feature allows the device to be shut down until a peripheral device begins communication. The active receiver can alert the processor, which can then take the ADM33xxE device out of the shutdown mode. The ADM3307E contains five drivers and three receivers and is intended for mobile phone data lump cables and portable computing applications. The ADM3311E contains three drivers and five receivers and is intended for serial port applications on notebook/laptop computers. The ADM3310E is a low current version of the ADM3311E. This device also allows two receivers to be active in shutdown mode. The ADM3312E contains three drivers and three receivers and is intended for serial port applications, Pd As, mobile phone data lump cables, and other hand-held devices. The ADM3315E is a low current version of the ADM3312E, with a 22 kOmega receiver input resistance that reduces the drive requirements of the DTE. Its main applications are Pd As, palmtop computers, and mobile phone data lump cables. The ADM33xxE devices are fabricated using CMOS technology for minimal power consumption. All parts feature a high level of over voltage protection and latch-up immunity. All ADM33xxE devices are available in a 32-lead 5 mm * 5 mm LFCSP_VQ and in a TS SOP (ADM3307E, ADM3310E, and ADM3311E in a 28-lead TSSOP; ADM3312E and ADM3315E in a 24-lead TSSOP). The ADM3311E also comes in a 28-lead SSOP. The ADM33xxE devices are ruggedized RS-232 line drivers/receivers that operate from a single supply of 2.7 V to 3.6 V. Step-up voltage converters coupled with level shifting transmitters and receivers allow RS-232 levels to be developed while operating from a single supply. Features include low power consumption, Green Idle operation, high transmission rates, and compatibility with the EU directive on electromagnetic compatibility. This EM compatibility directive includes protection against radiated and conducted interference, including high levels of electrostatic discharge. All RS-232 (and CMOS, SD, and EN for ADM3307E) inputs and outputs are protected against electrostatic discharges (up to -15 kV). This ensures compliance with IEC 1000-4-2 requirements. These devices are ideally suited for operation in electrically harsh environments or where RS-232 cables are frequently being plugged/unplugged. They are also immune to high RF field strengths without special shielding precautions. Emissions are also controlled to within very strict limits. CMOS technology is used to keep the power dissipation to an absolute minimum, allowing maximum battery life in portable applications.
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.