ADI ADF4107BCP

Part Number:: ADF4107BCP

Manufacturer:: ADI

Ventron No:: 5149867-ADF4107BCP

Description:: PLL Frequency Synthesizer

ECAD Model:

Datasheet:: ADF4107BCP

Specifications

ADI ADF4107BCP technical specifications, attributes, parameters and parts with similar specifications to ADI ADF4107BCP.

Mounting Type
Surface Mount
Package / Case
20-WFQFN Exposed Pad, CSP
Surface Mount
YES
Packaging
Tray
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
20
Terminal Finish
TIN LEAD
Voltage - Supply
2.7V~3.3V
Terminal Position
QUAD
Terminal Form
NO LEAD
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
3V
Terminal Pitch
0.5mm
Time@Peak Reflow Temperature-Max (s)
30
Output
Clock
Pin Count
20
JESD-30 Code
S-XQCC-N20
Qualification Status
COMMERCIAL
Operating Temperature (Max)
85°C
Operating Temperature (Min)
-40°C
Supply Voltage-Max (Vsup)
3.3V
Temperature Grade
INDUSTRIAL
Supply Voltage-Min (Vsup)
2.7V
Frequency (Max)
7GHz
Input
CMOS
Ratio - Input:Output
2:1
PLL
Yes
Differential - Input:Output
Yes/No
Divider/Multiplier
No/No
Length
4mm
Height Seated (Max)
1mm
Width
4mm
RoHS Status
Non-RoHS Compliant

Description

ADF4107BCP Overview
Clock ICs are packaged using the Tray method. In the 20-WFQFN Exposed Pad, CSP package, there is an embedded clock generator. A maximum temperature of 240 can be sustained by this clock generator ic during reflowing. There are a total of 20 terminations in this file. A voltage of 3V should be applied to this electronic frequency generator. In this case, CMOS is designed to be the input of the clock generator. The frequency generator has a maximum frequency of 7GHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 3.3V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 2.7V is recommended for safety reasons. There are 2.7V~3.3V available for use with this clock PLL. The PLL may become ha85°Cardous once the operating temperature exceeds 85°C. A temperature of less than -40°C may cause this clock PLL to fail to start. There are several logic levels in Clock logic that can be used with this clock generator. It is possible to classify this electronic component as a Clock/Frequency Synthesizer (RF). An IC that generates clocks specifically for microprocessors, this clock PLL is 20-bits in si20e.

ADF4107BCP Features
Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V

ADF4107BCP Applications
There are a lot of Rochester Electronics, LLC
ADF4107BCP Clock Generators applications.

Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel

ADF4107BCP More Descriptions

PLL Frequency Synthesizer Single 20-Pin LFCSP EP
IC PLL FREQUENCY SYNTHESIZER, 7000 MHz, QCC20, 4 X 4 MM, MO-220VGGD-1, LFCSP-20, PLL or Frequency Synthesis Circuit
IC PLL FREQ SYNTHESIZER 20-LFCSP
The ADF4107 frequency synthesizer can be used to implement local oscillators in the up-conversion and down-conversion sections of wireless receivers and transmitters. It consists of a low-noise digital PFD (phase frequency detector), a precision charge pump, a programmable reference divider, programmable A and B counters, and a dual-modulus prescaler (P/P 1). The A (6-bit) and B (13-bit) counters, in conjunction with the dual-modulus prescaler (P/P 1), implement an N divider (N = BP A). In addition, the 14-bit reference counter (R counter), allows selectable REFIN frequencies at the PFD input. A complete PLL (phase-locked loop) can be implemented if the synthesizer is used with an external loop filter and VCO (voltage controlled oscillator). Its very high bandwidth means that frequency doublers can be eliminated in many high frequency systems, simplifying system architecture and reducing cost.

Certification