ADI ADF4007BCP

ADF4007BCP Overview
Clock ICs are packaged using the Tube method. In the 20-WFQFN Exposed Pad, CSP package, there is an embedded clock generator. A maximum temperature of 240 can be sustained by this clock generator ic during reflowing. There are a total of 20 terminations in this file. A voltage of 3V should be applied to this electronic frequency generator. In this case, CMOS is designed to be the input of the clock generator. The frequency generator has a maximum frequency of 7.5GHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 3.3V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 2.7V is recommended for safety reasons. There are 2.7V~3.3V available for use with this clock PLL. The PLL may become ha85°Cardous once the operating temperature exceeds 85°C. A temperature of less than -40°C may cause this clock PLL to fail to start. There are several logic levels in Clock logic that can be used with this clock generator. It is possible to classify this electronic component as a Clock/Frequency Synthesizer (RF). An IC that generates clocks specifically for microprocessors, this clock PLL is 20-bits in si20e.

ADF4007BCP Features
Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V


ADF4007BCP Applications
There are a lot of Rochester Electronics, LLC
ADF4007BCP Clock Generators applications.


Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel