Analog Devices Inc. ADA4692-2ACPZ-R7

ADA4692-2ACPZ-R7 Overview
It is packaged in an 8-UFDFN, CSP-case that protects the operational amplifiers from damage. An op amp of this type is a Voltage Feedback-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 500μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 360μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 110dB. This op amp ic has 2 circuits. There are a total of 2 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. For optimal performance, this electrical part should be connected to a supply with a current of 180μA. It is important to keep in mind that the power supply voltage of this electric component is below 5V, which is suitable. Keeping the linear amplifier's supply voltage above 2.7V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 2.5V volts. The quiescent current is 180μA. The linear amplifier has 2 amplifiers.

ADA4692-2ACPZ-R7 Features
110dB voltage gain
Output Type: Rail-to-Rail


ADA4692-2ACPZ-R7 Applications
There are a lot of Analog Devices Inc.
ADA4692-2ACPZ-R7 Instrumentational OP Amps applications.


Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering