Analog Devices Inc. AD8542ARM-REEL

Name: AD8542ARM-REEL
Brand: Analog Devices Inc.
SKU: 3192090-AD8542ARM-REEL
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: AD8542ARM-REEL

Manufacturer:: Analog Devices Inc.

Ventron No:: 3192090-AD8542ARM-REEL

Description:: IC OPAMP GP 1MHZ RRO 8MSOP

ECAD Model:

Datasheet:: AD8542ARM-REEL

Specifications

Analog Devices Inc. AD8542ARM-REEL technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD8542ARM-REEL.

Mounting Type
Surface Mount
Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount
YES
Operating Temperature
-40°C~125°C
Packaging
Tape & Reel (TR)
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Terminal Finish
TIN LEAD
Subcategory
Operational Amplifier
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
2
Supply Voltage
3V
Terminal Pitch
0.65mm
Reach Compliance Code
unknown
Time@Peak Reflow Temperature-Max (s)
30
Pin Count
8
JESD-30 Code
S-PDSO-G8
Output Type
Rail-to-Rail
Number of Circuits
2
Current - Supply
45μA
Slew Rate
0.92V/μs
Amplifier Type
General Purpose
Common Mode Rejection Ratio
45 dB
Current - Input Bias
4pA
Voltage - Supply, Single/Dual (±)
2.7V~5.5V
Gain Bandwidth Product
1MHz
Unity Gain BW-Nom
980 kHz
Average Bias Current-Max (IIB)
0.001μA
Supply Voltage Limit-Max
6V
Voltage - Input Offset
1mV
Current - Output / Channel
30mA
Length
3mm
Height Seated (Max)
1.1mm
RoHS Status
Non-RoHS Compliant

Description

AD8542ARM-REEL Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 3V volts. It should be noted that this op amp is a type of Operational Amplifier device. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . On this instrumentation amplifier, there are 2 circuits that are connected together. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. As a recommendation, this electronic component should be used with a power supply that can deliver 45μA.

AD8542ARM-REEL Features
8 Pins
supply voltage of 3V
Output Type: Rail-to-Rail

AD8542ARM-REEL Applications
There are a lot of Rochester Electronics, LLC
AD8542ARM-REEL Instrumentational OP Amps applications.

Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement

AD8542ARM-REEL More Descriptions

Operational Amplifier, 2 Func, 7000uV Offset-Max, CMOS, PDSO8
OP Amp Dual GP R-R I/O 5.5V 8-Pin MSOP T/R
Non-RoHS Compliant S-PDSO-G8 TIN LEAD Tape & Reel (TR) op amp buffer circuit 3mm 0.001muA 3V 980kHz
OP DUAL LOW PWR RAIL/RAIL OP AMP
The AD8541/AD8542/AD8544 are single, dual, and quad rail-to-rail input and output single-supply amplifiers featuring very low supply current and 1 MHz bandwidth. All are guaranteed to operate from a 2.7 V single supply as well as a 5 V supply. These parts provide 1 MHz bandwidth at a low current consumption of 45 μA per amplifier. Very low input bias currents enable the AD8541/AD8542/AD8544 to be used for integrators, photodiode amplifiers, piezoelectric sensors, and other applications with high source impedance. The supply current is only 45 μA per amplifier, ideal for battery operation. Rail-to-rail inputs and outputs are useful to designers buffering ASICs in single-supply systems. The AD8541/AD8542/AD8544 are optimized to maintain high gains at lower supply voltages, making them useful for active filters and gain stages. The AD8541/AD8542/AD8544 are specified over the extended industrial temperature range (–40°C to 125°C). The AD8541 is available in 8-lead SOIC, 5-lead SC70, and 5-lead SOT-23 packages. The AD8542 is available in 8-lead SOIC, 8-lead MSOP, and 8-lead TSSOP surface-mount packages. The AD8544 is available in 14-lead narrow SOIC and 14-lead TSSOP surface-mount packages. All MSOP, SC70, and SOT versions are available in tape and reel only. Applications ASIC input or output amplifiers Sensor interfaces Piezoelectric transducer amplifiers Medical instrumentations Mobile communications Audio outputs Portable systems Data Sheet, Rev. F, 1/08

Certification