Analog Devices Inc. AD8310ARM

Name: AD8310ARM
Brand: Analog Devices Inc.
SKU: 3194558-AD8310ARM
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: AD8310ARM

Manufacturer:: Analog Devices Inc.

Ventron No:: 3194558-AD8310ARM

Description:: IC LOGARITHMIC AMP 95DB 8-MSOP

ECAD Model:

Datasheet:: AD8310ARM

Specifications

Analog Devices Inc. AD8310ARM technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD8310ARM.

Lifecycle Status
OBSOLETE (Last Updated: 5 months ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins
8
Supplier Device Package
8-MSOP
Packaging
Tube
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Resistance
1.2kOhm
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Applications
Receiver Signal Strength Indication (RSSI)
Max Power Dissipation
200mW
Base Part Number
AD8310
Number of Elements
6
Number of Channels
1
Max Supply Voltage
5.5V
Min Supply Voltage
2.7V
Operating Supply Current
8mA
Nominal Supply Current
8mA
Power Dissipation
80mW
Quiescent Current
8mA
Response Time
15 ns
Bandwidth
440MHz
3db Bandwidth
440MHz
Radiation Hardening
No
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead

Description

AD8310ARM Overview
In a Tube package, it is housed.There is no doubt that this is an excellent Logarithmic Amplifier that is very good value for money.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package was dispatched with this item.In order to mount the part, there is a process in which the part is mounted in the Surface Mount direction.The most common application for it is in the Receiver Signal Strength Indication (RSSI) environment.In this device, AD8310 represents the base part number.This is a 8-pin amplifier for your custom needs.-40°C is the lowest temperature at which the device can operate.This part has the capability of operating at temperatures of up to 85°C, which is quite impressive.This product has been enhanced with Surface Mount to enhance its design flexibility.Voltage 5.5V is the maximum supply voltage for this device.A minimum of 2.7V power should be provided with this product.To achieve such a high level of performance, this video processing device utilizes multiple 1 channels.It is supplied with a 8-MSOP package.In this amplifier, 1.2kOhm resistance is specified.It is recommended that the supply current be set to 8mA in order to keep the amplifier working normally.The -3db bandwidth performance of this device is 440MHz.The amplification process involves 6 basic elements.

AD8310ARM Features

AD8310ARM Applications
There are a lot of Analog Devices Inc. AD8310ARM Special Purpose Amplifiers applications.

Fast A/D and D/A converters, video amplifiers
Professional videography
Cinema or auditorium audio system
Video data acquisition
Vehicle electronics
Gaming industry
Semiconductor detectors
Navigation
Addition and subtraction operation circuits
Test equipment

AD8310ARM More Descriptions

SP Amp LOG Amp Single R-R I/P 5.5V 8-Pin MSOP Tube
IC LOGARITHMIC AMP 95DB 8-MSOP
Logarithmic Amplifiers V-Out DC to 440 MHz 95dB
USOIC 500MHZ 92DB LOG DETECTOR French Electronic Distributor since 1988
The AD8310 is a complete, dc to 440 MHz demodulating logarithmic amplifier (log amp) with a very fast voltage mode output, capable of driving up to 25 mA into a grounded load in under 15 ns. It uses the progressive compression (successive detection) technique to provide a dynamic range of up to 95 dB to ±3 dB law conformance or 90 dB to a ±1 dB error bound up to 100 MHz. It is extremely stable and easy to use, requiring no significant external components. A single-supply voltage of 2.7 V to 5.5 V at 8 mA is needed, corresponding to a power consumption of only 24 mW at 3 V. A fast-acting CMOS-compatible enable pin is provided. Each of the six cascaded amplifier/limiter cells has a small-signal gain of 14.3 dB, with a -3 dB bandwidth of 900 MHz. A total of nine detector cells are used to provide a dynamic range that extends from -91 dBV (where 0 dBV is defined as the amplitude of a 1 V rms sine wave), an amplitude of about ±40 µV, up to 4 dBV (or ±2.2 V). The demodulated output is accurately scaled, with a log slope of 24 mV/dB and an intercept of -108 dBV. The scaling parameters are supply- and temperature-independent. The fully differential input offers a moderately high impedance (1 kO in parallel with about 1 pF). A simple network can match the input to 50 O and provide a power sensitivity of -78 dBm to 17 dBm. The logarithmic linearity is typically within ±0.4 dB up to 100 MHz over the central portion of the range, but it is somewhat greater at 440 MHz. There is no minimum frequency limit; the AD8310 can be used down to low audio frequencies. Special filtering features are provided to support this wide range. The output voltage runs from a noise-limited lower boundary of 400 mV to an upper limit within 200 mV of the supply voltage for light loads. The slope and intercept can be readily altered using external resistors. The output is tolerant of a wide variety of load conditions and is stable with capacitive loads of 100 pF. The AD8310 provides a unique combination of low cost, small size, low power consumption, high accuracy and stability, high dynamic range, a frequency range encompassing audio to UHF, fast response time, and good load-driving capabilities, making this product useful in numerous applications that require the reduction of a signal to its decibel equivalent. The AD8310 is available in the industrial temperature range of -40°C to 85°C in an 8-lead MSOP package. Applications Conversion of signal level to decibel form Transmitter antenna power measurement Receiver signal strength indication (RSSI) Low cost radar and sonar signal processing Network and spectrum analyzers Signal-level determination down to 20 Hz True-decibel ac mode for multimeters

Certification