Analog Devices Inc. AD8052AR

Name: AD8052AR
Brand: Analog Devices Inc.
SKU: 3696642-AD8052AR
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: AD8052AR

Manufacturer:: Analog Devices Inc.

Ventron No:: 3696642-AD8052AR

Description:: IC OPAMP VFB 110MHZ RRO 8SOIC

ECAD Model:

Datasheet:: AD8052AR

Specifications

Analog Devices Inc. AD8052AR technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD8052AR.

Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Surface Mount
YES
Operating Temperature
-40°C~125°C
Packaging
Tube
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Terminal Finish
MATTE TIN
Subcategory
Operational Amplifier
Technology
BIPOLAR
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
2
Supply Voltage
5V
Reach Compliance Code
unknown
Time@Peak Reflow Temperature-Max (s)
40
Pin Count
8
JESD-30 Code
R-PDSO-G8
Output Type
Rail-to-Rail
Number of Circuits
2
Current - Supply
4.8mA
Slew Rate
170V/μs
Amplifier Type
Voltage Feedback
Common Mode Rejection Ratio
88 dB
Current - Input Bias
1.4μA
Voltage - Supply, Single/Dual (±)
3V~12V ±1.5V~6V
Neg Supply Voltage-Nom (Vsup)
-5V
Average Bias Current-Max (IIB)
3.5μA
Supply Voltage Limit-Max
6.3V
Voltage - Input Offset
1.8mV
Current - Output / Channel
45mA
3db Bandwidth
110MHz
Neg Supply Voltage-Max (Vsup)
-6.3V
Length
4.9mm
Height Seated (Max)
1.75mm
RoHS Status
Non-RoHS Compliant

Description

AD8052AR Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A Voltage Feedback-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. The buffer amp consists of 2 circuits in total. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. A supply of 4.8mA or higher is recommended for use with this electronic part.

AD8052AR Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail

AD8052AR Applications
There are a lot of Rochester Electronics, LLC
AD8052AR Instrumentational OP Amps applications.

single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing

AD8052AR More Descriptions

Amplifier, High Speed; High Speed Rail-to-Rail; 12.6 V; 45 mA (Typ.); -40 degC
OP Amp Dual Volt Fdbk R-R O/P ±6V/12V 8-Pin SOIC
AMP DUAL HIGH SPEED RRO/P, 8052; No. of Amplifiers:2; Slew Rate:145; Termination Type:SMD; Case Style:SOIC; No. of Pins:8; Operating Temperature Range:-40°C to 85°C; Amplifier IC Type:Operational; Bandwidth:110MHz; Base Number:8052; IC Generic Number:8052; Logic Function Number:8052; Operational Amplifier Features:Rail-to-Rail, 3V/5V or -5V operation; Temp, Op. Max:85°C; Temp, Op. Min:-40°C; Temperature Range, IC:Commercial; Voltage, Input Offset Max:12mV; Voltage, Supply Nom:5V
The AD8051 (single), AD8052 (dual) and AD8054 (quad) are low cost, high speed, voltage feedback amplifiers. The amplifiers operate on 3 V, 5 V or ±5 V supplies at low supply current. They have true single-supply capability with an input voltage range extending 200 mV below the negative rail and within 1 V of the positive rail. Despite their low cost, the AD8051/AD8052/AD8054 provide excellent overall performance and versatility. The output voltage swings to within 25 mV of each rail, providing the maximum output dynamic range with excellent overdrive recovery. The AD8051/AD8052/AD8054 are well suited for video electronics, cameras, video switchers, or any high speed portable equipment. Low distortion and fast settling make them ideal for active filter applications. The AD8051/AD8052 in the 8-lead SOIC, the AD8052 in the MSOP, the AD8054 in the 14-lead SOIC, and the 14-lead TSSOP packages are available in the extended temperature range of -40°C to 125°C. Applications Active filters Analog-to-digital drivers Clock buffer Consumer video Professional cameras CCD imaging systems CD/DVD ROMs

Certification