ADI AD7828KN

Part Number:: AD7828KN

Manufacturer:: ADI

Ventron No:: 5144384-AD7828KN

Description:: LC2MOS High Speed 4- & 8-Channel 8-Bit ADCs

ECAD Model:

Datasheet:: AD7828KN

Specifications

ADI AD7828KN technical specifications, attributes, parameters and parts with similar specifications to ADI AD7828KN.

Mounting Type
Through Hole
Package / Case
28-DIP (0.600, 15.24mm)
Surface Mount
NO
Operating Temperature
0°C~70°C
Packaging
Tube
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
28
Terminal Finish
TIN LEAD
Technology
CMOS
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
NOT APPLICABLE
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
2.54mm
Time@Peak Reflow Temperature-Max (s)
NOT APPLICABLE
Pin Count
28
Qualification Status
COMMERCIAL
Number of Bits
8
Converter Type
ADC, FLASH METHOD
Data Interface
Parallel
Sampling Rate
0.05 MHz
Number of Analog In Channels
8
Sampling Rate (Per Second)
50k
Output Bit Code
BINARY, COMPLEMENTARY OFFSET BINARY
Sample and Hold / Track and Hold
TRACK
Number of A/D Converters
3
Analog Input Voltage-Max
5V
Conversion Time-Max
2.4μs
Width
15.24mm
RoHS Status
Non-RoHS Compliant

Description

AD7828KN Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 28-DIP (0.600, 15.24mm) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 28 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 8 channels.The is equipped with 28 pin count.The peak reflow temperature (Cel) amounts to NOT APPLICABLE to be essentially indestructible.There are ADC, FLASH METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Through Hole.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 50k Hz.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The maximal analog input voltage of this electrical AD converter is 5V.There are 3 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller.

AD7828KN Features
1 Functions
28 basic kinds of terminations
28 pin count

AD7828KN Applications
There are a lot of Rochester Electronics, LLC
AD7828KN ADC applications.

Music recording
Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Transducer
Microcontrollers.
Digital Storage Oscilloscope
Scientific instruments.
Music reproduction technology

AD7828KN More Descriptions

ADC, Flash Method, 8-Bit, 1 Func, 8 Channel, Parallel, 8 Bits Access, CMOS, PDIP28
Single ADC Semiflash 50ksps 8-bit Parallel 28-Pin PDIP Tube
IC 8-CH 8-BIT FLASH METHOD ADC, PARALLEL ACCESS, PDIP28, 0.600 INCH, PLASTIC, MS-011AB, DIP-28, Analog to Digital Converter
The AD7824 and AD7828 are high speed, multichannel, 8-bitADCs with a choice of four (AD7824) or eight (AD7828) multiplexed analog inputs. A half-flash conversion technique gives a fast conversion rate of 2.5 t,s per channel, and the parts have a built-in track-and-hold function capable of digitizing full-scale signals of10 kHz (157 mV/t,s slew rate) on all channels. The AD7824 and AD7828 operate from a single 5 V supply and have an analog input range of 0 V to 5 V, using an external 5 V reference. Microprocessor interfacing of the parts is simple, using standard Chip Select ( CS) and Read (RD) signals to initiate the conversion and read the data from the three-state data outputs. The half-flash conversion technique means that there is no need to generate aclock signal for the ADC. The AD7824 and AD7828 can be interfaced easily to most popular microprocessors. The AD7824 and AD7828 are fabricated in an advanced, all ion-implanted, linear compatible CMOS process (LC 2MOS) and have low power dissipation of 40 mW (typ). The AD7824 is available in a 0.3" wide, 24-lead "skinny" DIP, while the AD7828 is available in a 0.6" wide, 28-lead DIP and in 28-terminal surface-mount packages.

Certification