Analog Devices Inc. AD743JR-16

Name: AD743JR-16
Brand: Analog Devices Inc.
SKU: 3191866-AD743JR-16
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: AD743JR-16

Manufacturer:: Analog Devices Inc.

Ventron No:: 3191866-AD743JR-16

Description:: IC OPAMP JFET 4.5MHZ 16SOIC

ECAD Model:

Datasheet:: AD743JR-16

Specifications

Analog Devices Inc. AD743JR-16 technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD743JR-16.

Mounting Type
Surface Mount
Package / Case
16-SOIC (0.295, 7.50mm Width)
Surface Mount
YES
Operating Temperature
0°C~70°C
Packaging
Tube
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Terminal Finish
TIN LEAD
Subcategory
Operational Amplifier
Technology
BIPOLAR
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
15V
Reach Compliance Code
unknown
Time@Peak Reflow Temperature-Max (s)
30
Pin Count
16
Number of Circuits
1
Current - Supply
8.1mA
Slew Rate
2.8V/μs
Amplifier Type
J-FET
Common Mode Rejection Ratio
95 dB
Current - Input Bias
250pA
Voltage - Supply, Single/Dual (±)
9.6V~36V ±4.8V~18V
Neg Supply Voltage-Nom (Vsup)
-15V
Unity Gain BW-Nom
4500 kHz
Average Bias Current-Max (IIB)
0.0006μA
Voltage - Input Offset
250μV
Current - Output / Channel
40mA
3db Bandwidth
4.5MHz
Height Seated (Max)
2.65mm
RoHS Status
Non-RoHS Compliant

Description

AD743JR-16 Overview
In order to protect the op amps, a 16-SOIC (0.295, 7.50mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 16. It consists of a total of 16 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In total, there are 1 circuits on this buffer amplifier. This electronic part is recommended to be used with an 8.1mA supply for best performance.

AD743JR-16 Features
16 Pins
supply voltage of 15V

AD743JR-16 Applications
There are a lot of Rochester Electronics, LLC
AD743JR-16 Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

AD743JR-16 More Descriptions

Non-RoHS Compliant e0 TIN LEAD Tube op amp amplifier circuit 2.65mm 0.0006muA -15V 4500kHz
Operational Amplifier, 1 Func, 1500uV Offset-Max, BIPolar, PDSO16
NEW DESIGNS consider the ADA4627-1. The AD743 is an ultralow noise precision, FET input, monolithic operational amplifier. It offers a combination of the ultralow voltage noise generally associated with bipolar input op amps and the very low input current of a FET-input device. Furthermore, the AD743 does not exhibit an output phase reversal when the negative common-mode voltage limit is exceeded. The AD743's guaranteed, maximum input voltage noise of 4.0 nV/(root)Hz at 10 kHz is unsurpassed for a FET-input monolithic op amp, as is the maximum 1.0 µV p-p, 0.1 to 10 Hz noise. The AD743 also has excellent dc performance with 250 pA maximum input bias current and 0.5 mV maximum offset voltage. The AD743 is specifically designed for use as a preamp in capacitive sensors, such as ceramic hydrophones. It is available in five performance grades. The AD743J and AD743K are rated over the commercial temperature range of 0°C to 70°C. The AD743A and AD743B are rated over the industrial temperature range of -40°C to 85°C. The AD743S is rated over the military temperature range of -55°C to 125°C and is available processed to MIL-STD-883B, Rev. C. The AD743 is available in 8-pin plastic mini-DIP, 8-pin cerdip, 16-pin SOIC, or in chip form.

Certification