Analog Devices Inc. AD203SN

AD203SN Overview
There is a 38-DIP (0.500, 12.70mm), 11 Leads case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Isolation-type. Upon delivery, op amp ic is packaged in a Tube case. 11 pins are located on the operational amplifiers. The input offset voltage is 5mV. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~125°C . The buffer amplifier is capable of operating from a supply current of 20mA . This op amp contains 1 circuits. On the buffer amps, there are 1 channels that can be used. For this linear amplifier to work, the temperature should not be below -55°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 125°C. The total number of elements in this buffer amplifier is 1. The operating supply voltage of the buffer op amp is rated at 15V. It is recommended that you use an 20mA power supply with this electrical part in order for it to operate correctly. Under 16V is the minimum supply voltage for this electric component. Over 12V is a recommended supply voltage for buffer ampsOn the linear amplifier, there are 1 amplifiers.

AD203SN Features


AD203SN Applications
There are a lot of Analog Devices Inc.
AD203SN Instrumentational OP Amps applications.


Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation