Part Number: DG403DY-T1-E3 vs DG406DY
Product CompareMain parameters of the product comparison, the results for reference only, so that you choose a more suitable product! | ||
---|---|---|
Part Number: | DG403DY-T1-E3 | DG406DY |
Manufacturer: | Vishay Siliconix | Intersil |
Description: | IC SWITCH DUAL SPDT 16SOIC | IC MULTIPLEXER 16X1 28SOIC |
Quantity Available: | Available | Available |
Datasheets: | - | - |
Factory Lead Time | 13 Weeks | - |
Contact Plating | Tin | - |
Mount | Surface Mount | Surface Mount |
Mounting Type | Surface Mount | - |
Package / Case | 16-SOIC (0.154, 3.90mm Width) | SOIC |
Number of Pins | 16 | 28 |
Weight | 665.986997mg | - |
Operating Temperature | -40°C~85°C TA | - |
Packaging | Tape & Reel (TR) | Bulk |
Published | 2008 | 2000 |
JESD-609 Code | e3 | e0 |
Pbfree Code | yes | - |
Part Status | Active | Discontinued |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) | - |
Number of Terminations | 16 | 28 |
Resistance | 55Ohm | 100Ohm |
Subcategory | Multiplexer or Switches | - |
Max Power Dissipation | 600mW | - |
Technology | CMOS | CMOS |
Terminal Form | GULL WING | GULL WING |
Peak Reflow Temperature (Cel) | 260 | - |
Number of Functions | 2 | 1 |
Supply Voltage | 15V | 15V |
Reflow Temperature-Max (s) | 30 | - |
Base Part Number | DG403 | - |
Pin Count | 16 | 28 |
Number of Outputs | 4 | - |
Qualification Status | Not Qualified | Not Qualified |
Operating Supply Voltage | 15V | - |
Polarity | Non-Inverting | - |
Number of Channels | 1 | 16 |
Number of Circuits | 2 | 1 |
Max Supply Voltage | 36V | - |
Min Supply Voltage | 13V | - |
Operating Supply Current | 5μA | 80μA |
Nominal Supply Current | 10nA | - |
Power Dissipation | 600mW | - |
Max Supply Current | 1μA | - |
Throw Configuration | SPDT | - |
Turn On Delay Time | 150 ns | - |
Voltage - Supply, Single/Dual (±) | 5V~34V ±5V~17V | - |
Supply Type | Dual, Single | Dual, Single |
Neg Supply Voltage-Nom (Vsup) | -15V | -15V |
Turn-Off Delay Time | 100 ns | - |
Max Dual Supply Voltage | 22V | - |
On-State Resistance (Max) | 45Ohm | - |
Min Dual Supply Voltage | 7V | - |
High Level Output Current | 100mA | - |
Dual Supply Voltage | 15V | - |
Multiplexer/Demultiplexer Circuit | 1:1 | - |
Off-state Isolation-Nom | 72 dB | 69 dB |
Current - Leakage (IS(off)) (Max) | 500pA | - |
Channel Capacitance (CS(off), CD(off)) | 12pF 12pF | - |
On-state Resistance Match-Nom | 3Ohm | 2.5Ohm |
Switch Circuit | SPST - NO/NC | - |
Switch Time (Ton, Toff) (Max) | 150ns, 100ns | - |
Charge Injection | 60pC | - |
Channel-to-Channel Matching (ΔRon) | 3 Ω | - |
Crosstalk | -90dB @ 1MHz | - |
Switching | BREAK-BEFORE-MAKE | BREAK-BEFORE-MAKE |
Drain to Source Resistance | 35Ohm | 50Ohm |
Height | 1.55mm | - |
Length | 10mm | - |
Width | 4mm | - |
REACH SVHC | Unknown | - |
RoHS Status | ROHS3 Compliant | RoHS Compliant |
Lead Free | Lead Free | Contains Lead |
Terminal Finish | - | Tin/Lead (Sn/Pb) |
Max Operating Temperature | - | 85°C |
Min Operating Temperature | - | -40°C |
Temperature Grade | - | INDUSTRIAL |
Logic Function | - | Multiplexer |
Switch-on Time-Max | - | 300ns |
Switch-off Time-Max | - | 300ns |
Submit RFQ: | Submit | Submit |