FREESCALE
New and Original factory sealed
Ⅱ. W25Q128JVSIQ symbol and footprint
Ⅴ. Pin configuration of W25Q128JVSIQ
Ⅶ. What are the characteristics of the SPI interface of W25Q128JVSIQ?
Ⅷ. What scenarios is W25Q128JVSIQ suitable for?
The W25Q128JVSIQ was manufactured by Winbond. It comes in an SOIC-8 package type, featuring 8 pins and 8 terminals for connectivity. It boasts a wide operating temperature range, capable of functioning in extreme conditions from -40°C to 85°C. Additionally, the device operates within a power supply voltage range of 2.7V to 3.6V, making it versatile for various applications. Its interface is based on SPI, offering efficient data transfer and control. To facilitate easy integration into electronic circuits, the W25Q128JVSIQ employs a surface mount installation method.
The W250128JV is compatible with the standard Serial Peripheral Interface (SPI) as well as Dual/Quad I/O SPI, which includes Serial Clock, Chip Select, Serial Data I/O0 (D), I/O1 (DO), I/O2, and I/O3. It can handle SPI clock frequencies of up to 133MHz, which means it can achieve clock rates of 266MHz (133MHz x 2) for Dual I/O and 532MHz (133MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O mode. These data transfer speeds can surpass those of regular Asynchronous 8 and 16-bit Parallel Flash memories. Furthermore, the device also supports JEDEC standard manufacturer and device identification (ID) as well as Serial Flash Discoverable Parameters (SFDP). It includes a unique 64-bit Serial Number and three Security Registers, each containing 256 bytes of data.
Replacement and equivalent:
• Has 4096 erasable sectors and 256 erasable blocks
• Provides flexibility and performance beyond ordinary serial flash devices
• Flexible architecture with 4KB sectors
• Operates from a single 2.7V to 3.6V power supply with current consumption as low as luA
• Highest performance serial flash memory
• Supports standard serial peripheral interface (SPI), dual/quad I/O SPI, and supports SPI clock frequency up to 133MHz
• The array is organized into 65536 programmable pages of 256 bytes each, with a maximum of 256 bytes programmable at a time.
• When using fast-read dual/quad inputs/outputs, the equivalent clock frequency is 266MHz (133MHz x 2) for dual inputs/outputs and 532MHz (133MHz x 4) for quad outputs.
• Pages can be erased in groups of 16 (4KB sector erase), 128 groups (32KB block erase), 256 groups (64KB block erase) or the entire chip (chip erase).
The pin configuration of W25Q128JVSIQ is shown in the figure below:
Pin 1: Hold or Reset Input (Data Input Output 3)
Pin 2: Power Supply
Pin 3: Reset Input
Pin 4: No Connect
Pin 5: No Connect
Pin 6: No Connect
Pin 7: Chip Select Input
Pin 8: Data Output (Data Input Output 1)
Pin 9: Write Protect Input (Data Input Output 2)
Pin 10: Ground
Pin 11: No Connect
Pin 12: No Connect
Pin 13: No Connect
Pin 14: No Connect
Pin 15: Data Input (Data Input Output 0)
Pin 16: Serial Clock Input
The package of W25Q128JVSIQ is SOIC-8. Small Outline Integrated Circuit (SOIC) is a common form of integrated circuit packaging. This kind of package is suitable for use in space-constrained scenarios, such as embedded systems in automotive, industrial, medical, aerospace and other fields. In addition, W25Q128JVSIQ adopts Surface Mount installation method, which is usually used in automated production lines and surface mount production.
• Supports multiple read and write modes such as fast read, gain read, page program and block erase. These modes are suitable for different application scenarios, such as reading, writing and erasing data.
• Support low power mode. In standby mode, its power consumption is only 5μA, which makes W25Q128JVSIQ suitable for low-power application scenarios.
• Supports programmable read protection to prevent illegal access to memory. Setting a specific register bit in the memory can prevent the data in the memory from being illegally read and modified.
• Supports standard serial peripheral interface (SPI), including serial clock, chip select, serial data I/O0(DI), I/O1(DO), I/O2 and I/O3.
• Supports multiple supply voltage ranges, making it suitable for a variety of power supply environments, including battery-powered portable devices and other devices requiring different voltage ranges.
• Supports SPI clock frequency up to 133MHz. When using fast-read dual/quad I/O, the equivalent clock rate for dual I/O is 266MHz (133MHz x 2) and the equivalent clock rate for quad I/O is 532MHz (133MHz x 4). These transfer rates can exceed standard asynchronous 8-bit and 16-bit parallel flash memory.
1. Storage systems for consumer electronic devices, such as storage expansion for smartphones, tablets, laptops and other electronic devices.
2. Storage systems for communication equipment and network equipment. For example, routers, switches and other network devices can use the W25Q128JVSIQ to store and protect important configuration data, operational logs and other information.
3. Storage systems for high-end applications such as automotive electronics and aerospace. In these fields, W25Q128JVSIQ has become an ideal choice for these applications due to its high reliability and durability.
4. Storage systems for embedded systems such as industrial control equipment, automation equipment, and medical equipment. These devices usually require reliable non-volatile memory to save data and parameters, and W25Q128JVSIQ has the characteristics of high reliability and low power consumption, making it very suitable for such products.
5. Used in application fields with high-speed data transmission and storage capacity requirements, such as high-definition video, audio storage, etc. Since W25Q128JVSIQ supports SPI clock frequency up to 133MHz, its high-speed data transmission characteristics make it suitable for these application scenarios that require fast data transmission and storage.
Frequently Asked Questions
1. What is the W25Q128JVSIQ?
The W25Q128JVSIQ is a Flash memory chip produced by Winbond Electronics. It's commonly used in various electronic devices to store data.
2. What is the interface of the W25Q128JVSIQ?
The W25Q128JVSIQ typically uses a Serial Peripheral Interface (SPI) for communication with other components or devices.
3. What is the operating temperature range of W25Q128JVSIQ?
The operating temperature of LM317LZ ranges from -40°C to 85°C.
4. What are some common applications for the W25Q128JVSIQ?
This Flash memory chip is often used in various applications, including consumer electronics, networking equipment, industrial devices, and more, where non-volatile storage is required.