UCC28501DWG4

UCC28501DWG4 Overview
There is a 20-SOIC (0.295, 7.50mm Width) package that comes with it.A Tube-packaging method was used to package it.Depending on the device, the mounting type will either be Surface Mount or C.It should operate with the voltage supply of 9.7V~18V.Device -40°C~85°C operates at -40°C~85°C.In addition to POWER FACTOR CONTROLLER WITH POST REGULATOR, the part has other types of ICs.The gadget has a number of 20 terminals on the back of it.Current startup state is 150μA.Pin number 20 remains the same for the component.Best part of the device has a UCC28501 in it.There is a frequency of switching called 80kHz~120kHz.The 20 pins are summed up.There is a minimum input voltage of 10.3V that can make it function properly.As a kind of subclass of Switching Regulator or Controllers, it can be seen as a kind of subclass of Switching Regulator or Controllers.The maximum input voltage (Max) of the circuit is 15V.With a frequency of 200kHz, it can continue to operate with good accuracy as long as it has a frequency of 200kHz.In terms of output current, it works at the maximum in 1.2AIt is powered by a 12V-volt supply at all times.Isup, the maximum supply current, shall not exceed 4mA.Among the other features are CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE, for example.

UCC28501DWG4 Features

UCC28501DWG4 Applications
There are a lot of Texas Instruments UCC28501DWG4 PFC PMICs applications.

Switching regulator
Communication device
Ultrasound
Bypass circuit
Fuel injector
CPU power supply
DVD and CD-ROM drive
Servers
Engine cooling fan
Home electric appliance