UCC25702N

• Factory Lead Time
  6 Weeks
• Lifecycle Status
  ACTIVE (Last Updated: 2 days ago)
• Mount
  Through Hole
• Mounting Type
  Surface Mount
• Package / Case
  14-DIP (0.300, 7.62mm)
• Number of Pins
  14
• Weight
  1.620005g
• Operating Temperature
  -40°C~85°C TA
• Packaging
  Tube
• JESD-609 Code
  e4
• Pbfree Code
  yes
• Part Status
  Active
• Moisture Sensitivity Level (MSL)
  1 (Unlimited)
• Number of Terminations
  14
• ECCN Code
  EAR99
• Terminal Finish
  Nickel/Palladium/Gold (Ni/Pd/Au)
• Subcategory
  Switching Regulator or Controllers
• Technology
  BICMOS
• Terminal Position
  DUAL
• Supply Voltage
  11V
• Terminal Pitch
  2.54mm
• Frequency
  700kHz
• Base Part Number
  UCC25702
• Function
  Step-Up, Step-Up/Step-Down
• Number of Outputs
  1
• Output Voltage
  400mV
• Output Type
  Transistor Driver
• Input Voltage-Nom
  11V
• Analog IC - Other Type
  SWITCHING CONTROLLER
• Output Configuration
  Positive, Isolation Capable
• Output Current
  100mA
• Voltage - Supply (Vcc/Vdd)
  8.8V~15V
• Quiescent Current
  750μA
• Control Features
  Current Limit, Frequency Control, Sequencing, Soft Start
• Input Voltage (Min)
  9.6V
• Topology
  Boost, Flyback, Forward Converter
• Control Mode
  VOLTAGE-MODE
• Frequency - Switching
  100kHz
• Control Technique
  PULSE WIDTH MODULATION
• Rise Time
  20ns
• Supply Current-Max (Isup)
  20mA
• Synchronous Rectifier
  No
• Fall Time (Typ)
  20 ns
• Switcher Configuration
  SINGLE
• Max Duty Cycle
  100 %
• Duty Cycle (Max)
  99%
• Clock Sync
  Yes
• Height
  5.08mm
• Length
  19.3mm
• Width
  6.35mm
• Thickness
  3.9mm
• RoHS Status
  ROHS3 Compliant
• Lead Free
  Lead Free

UCC25702N Overview
With its 14-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. dc motor controller is suitable for 1 output generation. There is a Tube solid enclosure around the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. 8.8V~15V is the supply voltage and the operating voltage of the dc control. A -40°C~85°C TA dc switcher is not a problem. With this switching controller, you can switch at 100kHz. dc dc regulator is made easier with Surface Mount. Current Limit, Frequency Control, Sequencing, Soft Start provides dcdc regulator efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. An array of 14 terminations of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 11V. Other relevant dc to dc converter ics will be returned if you search "UCC25702". In total, switching converter has 14 pins. The type is a particular Switching Regulator or Controllers of switching converter. 9.6V should be the minimum input voltage for the dc dc voltage regulator. DC regulator outputs 400mV voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 100mA, so you should note it down when starting a new project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. DC switcher's Through Hole qualifies it for most applications and prototypes. A frequency of 700kHz is set for the switching controller. In dormant mode, 750μA is used. A supply voltage of 11V is required. 20mA more than 20mA current should be supplied to the controller.

UCC25702N Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Frequency Control, Sequencing, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 700kHz

UCC25702N Applications
There are a lot of Texas Instruments UCC25702N DC to DC converter applications.

Digital video recorders
Elevator lighting
Thermal power
Hydraulic presses
Pipe bending machines
Sink circuits
Production lines
Fire elevators
Wide-range voltage regulation circuits
Surge protection circuits