TS5A23159RSER

Texas Instruments TS5A23159RSER

Part Number:
TS5A23159RSER
Manufacturer:
Texas Instruments
Ventron No:
3164297-TS5A23159RSER
Description:
1-? on-state resistance, 5-V, 2:1 (SPDT), 2-channel analog switch with powered-off protection
ECAD Model:
Datasheet:
ts5a23159

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Texas Instruments TS5A23159RSER technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments TS5A23159RSER.
  • Factory Lead Time
    8 Weeks
  • Lifecycle Status
    ACTIVE (Last Updated: 4 days ago)
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    10-UFQFN
  • Number of Pins
    10
  • Weight
    7.002332mg
  • Operating Temperature
    -40°C~85°C TA
  • Packaging
    Tape & Reel (TR)
  • JESD-609 Code
    e4
  • Pbfree Code
    yes
  • Part Status
    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    10
  • ECCN Code
    EAR99
  • Resistance
    900mOhm
  • Terminal Finish
    Nickel/Palladium/Gold (Ni/Pd/Au)
  • Additional Feature
    VIDEO APPLICATION
  • Subcategory
    Multiplexer or Switches
  • Terminal Position
    QUAD
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    2
  • Supply Voltage
    1.8V
  • Terminal Pitch
    0.5mm
  • Base Part Number
    TS5A23159
  • Pin Count
    10
  • Number of Outputs
    4
  • Power Supplies
    1.8/5V
  • Number of Channels
    2
  • Max Supply Voltage
    5.5V
  • Min Supply Voltage
    1.65V
  • Operating Supply Current
    10nA
  • Max Supply Current
    50nA
  • Turn On Delay Time
    13 ns
  • Supply Type
    Single
  • Bandwidth
    100MHz
  • Turn-Off Delay Time
    8 ns
  • On-State Resistance (Max)
    900mOhm
  • Multiplexer/Demultiplexer Circuit
    2:1
  • Off-state Isolation-Nom
    64 dB
  • Current - Leakage (IS(off)) (Max)
    20nA
  • Channel Capacitance (CS(off), CD(off))
    18pF
  • On-state Resistance Match-Nom
    0.15Ohm
  • Switch Circuit
    SPDT
  • Switch Time (Ton, Toff) (Max)
    13ns, 8ns
  • Charge Injection
    -7pC
  • Channel-to-Channel Matching (ΔRon)
    50m Ω
  • Crosstalk
    -64dB @ 1MHz
  • Switching
    BREAK-BEFORE-MAKE
  • Switch-on Time-Max
    55ns
  • Voltage - Supply, Single (V )
    1.65V~5.5V
  • Drain to Source Resistance
    900mOhm
  • Signal Current-Max
    0.1A
  • Height
    600μm
  • Length
    1.5mm
  • Width
    2mm
  • Thickness
    550μm
  • Radiation Hardening
    No
  • REACH SVHC
    No SVHC
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Lead Free
Description
TS5A23159RSER Overview
The electronic part can be shipped overseas conveniently because it is packaged in 10-UFQFN. High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 10. The electronic part delivers high-quality output through its 2 channels. When the electronic component is given a voltage of 1.8V, it should be turned on and run. 10 pins are injected to the electronic part body. On the other hand, analog switches can be constructed using SPDT switching circuits. Use TS5A23159 to search for variants of the digital switches. A 900mOhm internal resistance characterizes this multiplexer. To find out what the functions of 10 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The digital multiplexer has a low cost Single supply. In order for the electronic part to function properly, the lowest voltage should be 1.65V. The switch device would be able to operate with 10nA current. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. Putting voltage greater than 50nA on the multiplexer may cause damage. This switch operates within the bandwidth of 100MHz. Additional features of the electronic component include: VIDEO APPLICATION. It has a Drain to Source resistance of 900mOhm ohms. A analog switch ics with 4 outputs is included.

TS5A23159RSER Features
2 Channels
Switch Circuit: SPDT
10nA Supply Current
Bandwidth: 100MHz
Additional Features: VIDEO APPLICATION
Drain-to-Source resistance: 900mOhm

TS5A23159RSER Applications
There are a lot of Texas Instruments TS5A23159RSER Analog Switches & Multiplexers ICs applications.

PDH Multiplexers
Fiber In The Loop (FITL)
Avionics test equipment
65 V DACs
E1 Multiplexer
Fault Tolerant Systems
Relay Replacement
Communications systems
Audio signal routing
Audio and video switching
TS5A23159RSER More Descriptions
Analog Switch/Analog Multiplexer Dual 1:2 10-Pin UQFN T/R
1-Ω on-state resistance, 5-V, 2:1 (SPDT), 2-channel analog switch with powered-off protection 10-UQFN -40 to 85
IC SWITCH SPDTX2 900MOHM 10UQFN
French Electronic Distributor since 1988
ANALOGUE SWITCH, DUAL, SPDT, UQFN-10; No. of Channels:2Channels; Analogue Switch Type:SPDT; On State Resistance Max:0.9ohm; Supply Voltage Range:1.65V to 5.5V; Analogue Switch Case:UQFN; No. of Pins:10Pins; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Product Range:-; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (27-Jun-2018); Analogue Switch Case Style:UQFN
SPDT, 2 Func, 2 Channel, PQCC10
TS5A23159 2-CHANNEL, 2:1 ANALOG
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.