TLV705075YFPR

• Factory Lead Time
  6 Weeks
• Lifecycle Status
  ACTIVE (Last Updated: 3 days ago)
• Mounting Type
  Surface Mount
• Package / Case
  4-UFBGA, DSBGA
• Surface Mount
  YES
• Number of Pins
  4
• Operating Temperature
  -40°C~125°C TJ
• Packaging
  Tape & Reel (TR)
• Pbfree Code
  yes
• Part Status
  Active
• Moisture Sensitivity Level (MSL)
  1 (Unlimited)
• Number of Terminations
  4
• ECCN Code
  EAR99
• Terminal Position
  BOTTOM
• Terminal Form
  BALL
• Peak Reflow Temperature (Cel)
  NOT SPECIFIED
• Number of Functions
  1
• Reflow Temperature-Max (s)
  NOT SPECIFIED
• Base Part Number
  TLV705075
• Current - Supply (Max)
  315μA
• Number of Outputs
  1
• Voltage - Input (Max)
  5.5V
• Output Type
  Fixed
• Output Configuration
  Positive
• Current - Output
  200mA
• Quiescent Current
  30μA
• Control Features
  Enable
• Output Voltage 1
  0.75V
• Input Voltage (Min)
  2V
• Voltage - Output (Min/Fixed)
  0.75V
• Number of Regulators
  1
• Protection Features
  Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)
• Current - Quiescent (Iq)
  55μA
• Voltage Dropout (Max)
  0.25V @ 200mA
• PSRR
  80dB ~ 55dB (10kHz ~ 1MHz)
• Dropout Voltage
  145mV
• Dropout Voltage1-Nom
  0.145V
• Output Voltage1-Max
  0.77V
• Output Voltage1-Min
  0.73V
• Height
  500μm
• Length
  0m
• Width
  0m
• Thickness
  0m
• RoHS Status
  ROHS3 Compliant
• Lead Free
  Lead Free

TLV705075YFPR Overview
In a Tape & Reel (TR) case, the IC voltage regulator is delivered. There is a 4-UFBGA, DSBGA case with the integrated voltage regulator. The PMIC chip has 4 terminations. This PMIC chip has an output type of Fixed. As part of this electrical component, 1 regulators are implemented. As a result of the Linear Voltage Regulator's design, the operating temperature of Surface Mount can be adjusted within a specified range. Default settings are set to -40°C~125°C TJ degrees. Currently, this regulator IC has an output function configured as Positive as its output function. There is an 200mAmp current output on this voltage regulator IC. The regulator has a total of 1 outputs to make sure that it delivers prompt, sufficient outputs. This voltage regulator IC has a dropout voltage of 10 volts. A 4-pin is present on the chip. For your information, this regulator's basic part number is TLV705075. It operates in the 30μA Quiescent Current state.

TLV705075YFPR Features
145mV dropout voltage

TLV705075YFPR Applications
There are a lot of Texas Instruments TLV705075YFPR Linear Voltage Regulators applications.

PLL (Phase-Locked Loop)
Car window lift
IO devices
Personal communication device
Low Noise Instrumentation
Car eCall
Temperature monitoring
Fuel injector
Arduino servo control
Peripheral devices