Texas Instruments TLV5604IDRG4
- Part Number:
- TLV5604IDRG4
- Manufacturer:
- Texas Instruments
- Ventron No:
- 3821004-TLV5604IDRG4
- Description:
- IC 10-BIT QUAD SER DAC 16-SOIC
- Datasheet:
- TLV5604IDRG4
Texas Instruments TLV5604IDRG4 technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments TLV5604IDRG4.
- MountSurface Mount
- Mounting TypeSurface Mount
- Package / Case16-SOIC (0.154, 3.90mm Width)
- Number of Pins16
- Operating Temperature-40°C~85°C
- PackagingTape & Reel (TR)
- Pbfree Codeyes
- Part StatusObsolete
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations16
- SubcategoryOther Converters
- Max Power Dissipation3mW
- TechnologyCMOS
- Terminal PositionDUAL
- Terminal FormGULL WING
- Number of Functions1
- Supply Voltage3V
- Terminal Pitch1.27mm
- Base Part NumberTLV5604
- Pin Count16
- Output TypeVoltage - Buffered
- Power Supplies3/5V
- InterfaceSPI, Serial
- Max Supply Voltage5.5V
- Min Supply Voltage2.7V
- Nominal Supply Current3.5mA
- Number of Bits10
- ArchitectureString DAC
- Converter TypeD/A CONVERTER
- Supply TypeAnalog, Digital
- Reference TypeExternal
- Data InterfaceSPI
- Differential OutputNo
- Resolution1.25 B
- Sampling Rate102 ksps
- Voltage - Supply, Analog2.7V~3.3V 5V
- Voltage - Supply, Digital2.7V~3.3V 5V
- Settling Time18μs
- Linearity Error-Max (EL)0.0977%
- Integral Nonlinearity (INL)1 LSB
- Input Bit CodeBINARY
- Conversion Rate102 ksps
- INL/DNL (LSB)±1 (Max), ±0.1
- Number of D/A Converters4
- Analog Output Voltage-Max5.1V
- Height Seated (Max)1.75mm
- Length9.9mm
- Width3.9mm
- RoHS StatusROHS3 Compliant
TLV5604IDRG4 Overview
This package is included in the 16-SOIC (0.154, 3.90mm Width) package and is available for purchase. The supply voltage is 3V volts. An FPGA part from the Other Converters family. An FPGA module can be attached to a development board with a Surface Mount-pin. While operating, the operating temperature should be kept within a range of -40°C~85°C. Unlike other FPGA models, this one is contained in Tape & Reel (TR) for the sake of space saving. The total number of terminations is 16. Parts related to this part can be found using its base part number TLV5604. There are 16 pins on this device. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. An external power supply of 3/5V is required to power the device. As far as the pin count is concerned, it has 16 pins. This device is capable of supporting a maximum supply voltage of 5.5V. The device can function at a minimum voltage of 2.7V.
TLV5604IDRG4 Features
16-SOIC (0.154, 3.90mm Width) package
16 pin count
16 pins
TLV5604IDRG4 Applications
There are a lot of Texas Instruments TLV5604IDRG4 Digital to Analog Converters (DAC)?applications.
Calibration
Bus Structured instruments
Motor Control
Programmable Power Supplies
Low Cost I/O
Instrumentation
Video Encoder
Automatic Test Equipment
Portable Equipment
Digital Radio Link
This package is included in the 16-SOIC (0.154, 3.90mm Width) package and is available for purchase. The supply voltage is 3V volts. An FPGA part from the Other Converters family. An FPGA module can be attached to a development board with a Surface Mount-pin. While operating, the operating temperature should be kept within a range of -40°C~85°C. Unlike other FPGA models, this one is contained in Tape & Reel (TR) for the sake of space saving. The total number of terminations is 16. Parts related to this part can be found using its base part number TLV5604. There are 16 pins on this device. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. An external power supply of 3/5V is required to power the device. As far as the pin count is concerned, it has 16 pins. This device is capable of supporting a maximum supply voltage of 5.5V. The device can function at a minimum voltage of 2.7V.
TLV5604IDRG4 Features
16-SOIC (0.154, 3.90mm Width) package
16 pin count
16 pins
TLV5604IDRG4 Applications
There are a lot of Texas Instruments TLV5604IDRG4 Digital to Analog Converters (DAC)?applications.
Calibration
Bus Structured instruments
Motor Control
Programmable Power Supplies
Low Cost I/O
Instrumentation
Video Encoder
Automatic Test Equipment
Portable Equipment
Digital Radio Link
TLV5604IDRG4 More Descriptions
Converters - Digital to Analog (DAC) 10-Bit, 3 us Quad DAC, Serial Input
D/A Converter (D-A) IC; Resolution (Bits):10; Settling Time:2.5µs; Update Rate:0.102MSPS; No. of DACs:4; Data Interface:Serial, 4-Wire; Output Type:Voltage; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Termination Type:SMD ;RoHS Compliant: Yes
The TLV5604 is a quadruple 10-bit voltage output digital-to-analog converter (DAC) with a flexible 4-wire serial interface. The 4-wire serial interface allows glueless interface to TMS320, SPI, QSPI, and Microwire serial ports. The TLV5604 is programmed with a 16-bit serial word comprised of a DAC address, individual DAC control bits, and a 10-bit DAC value. The device has provision for two supplies: one digital supply for the serial interface (via pins DVDD and DGND), and one for the DACs, reference buffers and output buffers (via pins AVDD and AGND). Each supply is independent of the other, and can be any value between 2.7 V and 5.5 V. The dual supplies allow a typical application where the DAC will be controlled via a microprocessor operating on a 3-V supply (also used on pins DVDD and DGND), with the DACs operating on a 5-V supply. Of course, the digital and analog supplies can be tied together. The resistor string output voltage is buffered by a x2 gain rail-to-rail output buffer. The buffer features a Class AB output stage to improve stability and reduce settling time. A rail-to-rail output stage and a power-down mode makes it ideal for single voltage, battery based applications. The settling time of the DAC is programmable to allow the designer to optimize speed versus power dissipation. The settling time is chosen by the control bits within the 16-bit serial input string. A high-impedance buffer is integrated on the REFINAB and REFINCD terminals to reduce the need for a low source impedance drive to the terminal. REFINAB and REFINCD allow DACs A and B to have a different reference voltage then DACs C and D. The device, implemented with a CMOS process, is available in 16-terminal SOIC and TSSOP packages. The TLV5604C is characterized for operation from 0C to 70C. The TLV5604I is characterized for operation from 40C to 85C.
D/A Converter (D-A) IC; Resolution (Bits):10; Settling Time:2.5µs; Update Rate:0.102MSPS; No. of DACs:4; Data Interface:Serial, 4-Wire; Output Type:Voltage; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Termination Type:SMD ;RoHS Compliant: Yes
The TLV5604 is a quadruple 10-bit voltage output digital-to-analog converter (DAC) with a flexible 4-wire serial interface. The 4-wire serial interface allows glueless interface to TMS320, SPI, QSPI, and Microwire serial ports. The TLV5604 is programmed with a 16-bit serial word comprised of a DAC address, individual DAC control bits, and a 10-bit DAC value. The device has provision for two supplies: one digital supply for the serial interface (via pins DVDD and DGND), and one for the DACs, reference buffers and output buffers (via pins AVDD and AGND). Each supply is independent of the other, and can be any value between 2.7 V and 5.5 V. The dual supplies allow a typical application where the DAC will be controlled via a microprocessor operating on a 3-V supply (also used on pins DVDD and DGND), with the DACs operating on a 5-V supply. Of course, the digital and analog supplies can be tied together. The resistor string output voltage is buffered by a x2 gain rail-to-rail output buffer. The buffer features a Class AB output stage to improve stability and reduce settling time. A rail-to-rail output stage and a power-down mode makes it ideal for single voltage, battery based applications. The settling time of the DAC is programmable to allow the designer to optimize speed versus power dissipation. The settling time is chosen by the control bits within the 16-bit serial input string. A high-impedance buffer is integrated on the REFINAB and REFINCD terminals to reduce the need for a low source impedance drive to the terminal. REFINAB and REFINCD allow DACs A and B to have a different reference voltage then DACs C and D. The device, implemented with a CMOS process, is available in 16-terminal SOIC and TSSOP packages. The TLV5604C is characterized for operation from 0C to 70C. The TLV5604I is characterized for operation from 40C to 85C.
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
15 March 2024
ULN2003 Alternatives, Characteristics, Working Principle and Application
Ⅰ. ULN2003 overviewⅡ. What are the characteristics of ULN2003?Ⅲ. Pin diagram and functions of ULN2003Ⅳ. Working principle and function of ULN2003Ⅴ. ULN2003 drive circuit diagramⅥ. Where is ULN2003... -
15 March 2024
Detailed Explanation of 24C02 EEPROM Memory Chip
Ⅰ. Overview of 24C02Ⅱ. Functions of 24C02Ⅲ. Basic operations of 24C02Ⅳ. Application of 24C02Ⅴ. 24C02 pinoutⅥ. How to protect the data of 24C02?Ⅶ. How to use 24C02?EEPROM refers... -
18 March 2024
LM324N Internal Structure, Working Principle and LM324 vs LM324N
Ⅰ. Overview of LM324NⅡ. Internal structure and working principle of LM324NⅢ. Typical performance characteristics of LM324NⅣ. How to configure the power supply for LM324N?Ⅴ. Pin description of LM324NⅥ.... -
18 March 2024
TDA7377 Audio Power Amplifier Alternatives, Application and Other Details
Ⅰ. Overview of TDA7377Ⅱ. Performance evaluation of TDA7377Ⅲ. Internal circuit diagram of TDA7377Ⅳ. Application of TDA7377Ⅴ. PCB-layout grounding of TDA7377Ⅵ. TDA7377 power amplifier chip parametersⅦ. How to ensure...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.