Texas Instruments TLV3012AIDCKTG4

TLV3012AIDCKTG4 Overview
It is packaged in an SC-case that protects the operational amplifiers from damage. An op amp of this type is a COMPARATOR-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 6 terminations this year. A total of 6 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Comparator op amp ic can be identified by the fact that this is a type of Comparator device. In total, the buffer amplifier consists of 6 pins. Op amp ic rates 12mV for input offset voltage. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs PUSH-PULL signals. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. The operating supply voltage of the buffer op amp is rated at 5V. It is important to keep in mind that the power supply voltage of this electric component is below 5.5V, which is suitable. Keeping the linear amplifier's supply voltage above 1.8V is recommended. The quiescent current is 5μA.

TLV3012AIDCKTG4 Features
6 Pins
supply voltage of 5V
Output Type: PUSH-PULL


TLV3012AIDCKTG4 Applications
There are a lot of Texas Instruments
TLV3012AIDCKTG4 Instrumentational OP Amps applications.


Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering