Texas Instruments TLE2024ACDWG4

TLE2024ACDWG4 Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 16 pins. Op amp ic rates 850μV for input offset voltage. A supply current of 1.05mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 123.52dB. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 4 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 20V. It is important to keep in mind that the power supply voltage of this electric component is below 40V, which is suitable. Keeping the linear amplifier's supply voltage above 4V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 20V volts.

TLE2024ACDWG4 Features
16 Pins
supply voltage of 15V
123.52dB voltage gain


TLE2024ACDWG4 Applications
There are a lot of Texas Instruments
TLE2024ACDWG4 Instrumentational OP Amps applications.


Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering