Texas Instruments TLC1514IDG4

Description
The TLC1518 and TLC1514 are high-performance, 10-bit, low-power, 1.4 μs CMOS SAR analog-to-digital converters (ADCs) that operate from a single 5 V power supply. They feature a 4-wire SPI interface for direct connection to microprocessors and DSPs. The devices have an on-chip analog multiplexer that can select any analog input or one of three internal self-test voltages. The sample-and-hold function can be automatically started or controlled by a special pin (CSTART) for extended sampling. The normal sampling period can be programmed as short (12 SCLKS) or long (24 SCLKS) to accommodate faster SCLK operation.

Features
Maximum throughput: 400 KSPS
Built-in reference and 8x FIFO
Differential/integral nonlinearity error: ±0.5 LSB max
Signal-to-noise and distortion ratio: 59 dB, f₁ = 12 kHz
Spurious free dynamic range: 72 dB, f₁ = 12 kHz
SPI/DSP-compatible serial interfaces with SCLK up to 20 MHz
Single supply 5 Vdc
Analog input range: 0 V to supply voltage with 500 kHz BW
Hardware-controlled and programmable sampling period
Low operating current (4 mA at 5.5 V external ref, 6 mA at 5.5 V, internal ref)
Power down: software/hardware power-down mode (1 μA max, ext ref), auto power-down mode (5 μA, ext ref)
Programmable auto-channel sweep
Pin compatible, 12-bit upgrades available (TLC2554, TLC2558)

Applications
Data acquisition systems
Process control
Medical instrumentation
Industrial automation
Battery-powered applications