Microchip Technology TC9400CPD

TC9400CPD Overview
This is included in the 14-DIP (0.300, 7.62mm) package. The electronic component is mounted in the direction of Through Hole. Currently, there is a package in the way of Tube. In this case, an electrical device of type Volt to Frequency and Frequency to Volt is being used. The 14 termination is a technique in which a transmission line is terminated with a device whose characteristic impedance matches that of the transmission line. Devices equipped with a 14 pin count are available. It is powered from a supply voltage of 5V. It is possible to identify related parts based on the base part number. When a computer or other communication device is attached to a signal interface, there are 14 pins, which are pronged contacts. A minimum operating temperature of 0°C is required to ensure its reliability during operation. In order to ensure its reliability, it operates at an operating temperature of 70°C. It is mounted in the way of Through Hole. It is recommended that the supply voltage (Vsup) exceed 8V. When 15V is reached, the maximum supply voltage (Vsup) is reached. A frequency of 100kHz is used for its operation. Power is provided by a dual voltage supply of 5V. Input type -2V is the most negative that can be used for this electronic component. There is an output voltage of 18V supported by it. There is a bandwidth of 100 kHz for this electrical device.

TC9400CPD Features
14-DIP (0.300, 7.62mm) package
14 terminations
14 pin count
14 pins
A dual supply voltage of 5V

TC9400CPD Applications
There are a lot of Microchip Technology TC9400CPD V/F & F/V Converters applications.

Motor speed control
Motor Control
Voltage to Frequency Conversions
Phase Locked Loops
Serial frequency output
Breaker Point Dwell Meters
Automotive Door L ock Control
Cruise Control
Analog Data Transmission and Recording
Frequency-to-Voltage Conversion (Tachometer)