STMicroelectronics STM32F100C6T6BTR

STM32F100C6T6BTR                  Description
 The STM32F100x4, STM32F100x6, STM32F100x8 and STM32F100xB microcontrollers incorporate the high-performance ARM? Cortex?-M3 32-bit RISC core operating at a 24 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 8 Kbytes), and an extensive range of enhanced peripherals and I/Os connected to two APB buses. All devices offer standard communication interfaces (up to two I2Cs, two SPIs, one HDMI CEC, and up to three USARTs), one 12-bit ADC, two 12-bit DACs, up to six general-purpose 16-bit timers and an advanced-control PWM timer. The STM32F100xx low- and medium-density devices operate in the – 40 to 85 °C and – 40 to 105 °C temperature ranges, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications. 
STM32F100C6T6BTR                 Features
? Core: ARM? 32-bit Cortex?-M3 CPU – 24 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance – Single-cycle multiplication and hardware division ? Memories – 16 to 128 Kbytes of Flash memory – 4 to 8 Kbytes of SRAM ? Clock, reset and supply management – 2.0 to 3.6 V application supply and I/Os – POR, PDR and programmable voltage detector (PVD) – 4-to-24 MHz crystal oscillator – Internal 8 MHz factory-trimmed RC – Internal 40 kHz RC – PLL for CPU clock – 32 kHz oscillator for RTC with calibration ? Low power – Sleep, Stop and Standby modes – VBAT supply for RTC and backup registers ? Debug mode – Serial wire debug (SWD) and JTAG interfaces ? DMA – 7-channel DMA controller – Peripherals supported: timers, ADC, SPIs, I 2Cs, USARTs and DACs ? 1 × 12-bit, 1.2 μs A/D converter (up to 16 channels) – Conversion range: 0 to 3.6 V – Temperature sensor ? 2 × 12-bit D/A converters ? Up to 80 fast I/O ports – 37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-toleran   STM32F100C6T6BTR            Applications
These features make these microcontrollers suitable for a wide range of applications such as application control and user interfaces, medical and hand-held equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.