SN75HVD05DRG4

Texas Instruments SN75HVD05DRG4

Part Number:
SN75HVD05DRG4
Manufacturer:
Texas Instruments
Ventron No:
3175428-SN75HVD05DRG4
Description:
IC RS-485 TXRX HIGH OUT 8-SOIC
ECAD Model:
Datasheet:
SN75HVD05DRG4

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Texas Instruments SN75HVD05DRG4 technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments SN75HVD05DRG4.
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    8-SOIC (0.154, 3.90mm Width)
  • Number of Pins
    8
  • Operating Temperature
    0°C~70°C
  • Packaging
    Tape & Reel (TR)
  • Pbfree Code
    yes
  • Part Status
    Obsolete
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    8
  • ECCN Code
    EAR99
  • Additional Feature
    SIGNALING RATE UPTO 40 MBPS
  • Subcategory
    Line Driver or Receivers
  • Technology
    BICMOS
  • Voltage - Supply
    4.5V~5.5V
  • Terminal Position
    DUAL
  • Terminal Form
    GULL WING
  • Peak Reflow Temperature (Cel)
    NOT SPECIFIED
  • Number of Functions
    1
  • Supply Voltage
    5V
  • Terminal Pitch
    1.27mm
  • Time@Peak Reflow Temperature-Max (s)
    NOT SPECIFIED
  • Base Part Number
    75HVD05
  • Pin Count
    8
  • Qualification Status
    Not Qualified
  • Power Supplies
    5V
  • Number of Circuits
    256
  • Nominal Supply Current
    15mA
  • Data Rate
    40Mbps
  • Differential Output
    YES
  • Protocol
    RS422, RS485
  • Input Characteristics
    DIFFERENTIAL SCHMITT TRIGGER
  • Number of Drivers/Receivers
    1/1
  • Driver Number of Bits
    1
  • Receiver Number of Bits
    1
  • Duplex
    Half
  • Receiver Hysteresis
    35mV
  • Receive Delay-Max
    25 ns
  • Transmit Delay-Max
    11 ns
  • Out Swing-Min
    2.5 V
  • Length
    4.9mm
  • Height Seated (Max)
    1.75mm
  • Width
    3.9mm
  • RoHS Status
    ROHS3 Compliant
Description
SN75HVD05DRG4 Overview
This LED driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package for driving common LEDs.The receiver is packaged in a Tape & Reel (TR) package.As a Transceiver can transceiver, this part has enabled many applications to be served.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver uses 4.5V~5.5V for power supply.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.With a supply voltage range of 5V, this line driver ic operates efficiently.8 terminations are integrated into this wide receiver for driving and receiving signals from data.It is packaged with 8 pinouts that are market standard for this particular transceiver.The base part number 75HVD05 identifies the product type, temperature, package, etc., so you can search for more variants by using it.A 8-pin driver IC with enhanced power dissipation control is featured here.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.Using this ic receiver, you were able to achieve a resolution of 1 bits.It is typical for this receiver to have a resolution of 1 bits when it is specified.Line Driver or Receivers is a subcategory of this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.The SIGNALING RATE UPTO 40 MBPS function of this optical transceiver module improves the overall stability and accuracy of signal management.The transceiver module comes with a total of 256 circuits integrated into it.

SN75HVD05DRG4 Features
Tape & Reel (TR) package
8 pin count
8 pins
5V power supply


SN75HVD05DRG4 Applications
There are a lot of Texas Instruments
SN75HVD05DRG4 Drivers/Receivers/Transceivers applications.


Cell phones
Wireless modems
Remote controls
Wireless network systems
Satellite communications networks
Ethernet circuitry
Wired telephone
Cordless telephone
Desktop PC
Notebook
SN75HVD05DRG4 More Descriptions
RS-485 Interface ICs High-Output RS-485 Transceiver
IC RS-485 TXRX HIGH OUT 8-SOIC
The SN65HVD05, SN75HVD05, SN65HVD06, SN75HVD06, SN65HVD07, and SN75HVD07 combine a 3-state differential line driver and differential line receiver. They are designed for balanced data transmission and interoperate with ANSI TIA/EIA-485-A and ISO 8482E standard-compliant devices. The driver is designed to provide a differential output voltage greater than that required by these standards for increased noise margin. The drivers and receivers have active-high and active-low enables respectively, which can be externally connected together to function as direction control. The driver differential outputs and receiver differential inputs connect internally to form a differential input/ output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or not powered. These devices feature wide positive and negative common-mode voltage ranges, making them suitable for party-line applications.
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.