Texas Instruments SN74LVTH16241DL
- Part Number:
- SN74LVTH16241DL
- Manufacturer:
- Texas Instruments
- Ventron No:
- 3202759-SN74LVTH16241DL
- Description:
- 16-ch, 2.7-V to 3.6-V buffers with bus-hold, TTL-compatible CMOS inputs and 3-state outputs
- Datasheet:
- sn74lvth16241
- Technology familyLVT
- Supply voltage (min) (V)2.7
- Supply voltage (max) (V)3.6
- Number of channels16
- IOL (max) (mA)64
- Supply current (max) (μA)5000
- IOH (max) (mA)-32
- Input typeTTL-Compatible CMOS
- Output type3-State
- FeaturesBus-hold
- RatingCatalog
- Operating temperature range (°C)-40 to 85
These 16-bit buffers/drivers are designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.
The devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. The devices provide noninverting outputs and complementary output-enable (OE and OE) inputs.
When VCC is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE should be tied to VCC through a pullup resistor and OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sinking/current-sourcing capability of the driver.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
These devices are fully specified for hot-insertion applications using Ioff and power-up 3-state. The Ioff circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.
The SN54LVTH16241 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74LVTH16241 is characterized for operation from -40°C to 85°C.
Buffer, Non-Inverting 4 Element 4 Bit per Element 3-State Output 48-SSOP
Buffer/Line Driver 16-CH Non-Inverting 3-ST BiCMOS 48-Pin SSOP Tube
IC BUFFER NON-INVERT 3.6V 48SSOP
IC BUFF/DVR TRI-ST 16BIT 48SSOP
Buffer Logic IC; Buffer Type:Non-Inverting Buffer; Supply Voltage Range:2.7V to 3.6V; Logic Case Style:SSOP; No. of Pins:48; Operating Temperature Range:-40°C to 85°C; Input Type:TTL/CMOS; Leaded Process Compatible:Yes ;RoHS Compliant: Yes
Latest News
-
14 December 2023
An Introduction to the A3144 Magnetic Hall Effect Sensor
Ⅰ. What is a Hall sensor?Ⅱ. Overview of A3144 Hall effect sensorⅢ. Manufacturer of A3144 Hall effect sensorⅣ. What are the features of A3144 Hall effect sensor?Ⅴ. Pin... -
15 December 2023
Introduction to the Use of Operational Amplifier Circuit Based on LM324
Ⅰ. Overview of LM324 operational amplifierⅡ. Four different packages of LM324 operational amplifierⅢ. Functions of LM324 operational amplifierⅣ. Maximum ratings of LM324 operational amplifierⅤ. Characteristics of LM324 operational... -
15 December 2023
A Comprehensive Guide to Harnessing the Power of the TDA7850 Audio Amplifier
Ⅰ. TDA7850 overviewⅡ. How does the TDA7850 perform in terms of sound quality?Ⅲ. Specifications of TDA7850 audio amplifierⅣ. Electrical characteristic curves of TDA7850 audio amplifierⅤ. What kind of... -
18 December 2023
LT4320 Ideal Diode Bridge Controllers Subverts the Traditional Bridge Rectifier
Ⅰ. What is LT4320?Ⅱ. How does LT4320 overcome the shortcomings of full-wave rectification?Ⅲ. Which manufacturer makes the LT4320?Ⅳ. Pin configuration of LT4320Ⅴ. Three-phase ideal rectification based on LT4320Ⅵ....
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.