Texas Instruments SN74LV595APWR

SN74LV595APWR Overview
As a result, 16-TSSOP (0.173, 4.40mm Width) package contains the embedded device. 16 is the number of terminations on the chip. Presented in a case of Tape & Reel (TR). There is 2.5V operating supply voltage listed on the part. There are 1 elements on this part. It has 16 pins. The recommended mounting method is Surface Mount. The electronic component belongs to the LV/LV-A/LVX/H. There is a component mounted in the way of Surface Mount on this board. Operating temperatures are within the range of -40°C~85°C. Votage is supplied within 2V~5.5V. In this case, the electrical component belongs to the series 74LV. You can search for similar parts based on the 74LV595 family. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. For this part, Vsup should not be less than 2V. There is a possibility of delivering voltage at 3.3V. In this part, the maximum supply voltage (Vsup) should not exceed 5.5V. A total of 9 output lines need to be operated. There is a TR packaging for the part. Its frequency is set to 170MHz.

SN74LV595APWR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74LV595 family
It supplies 3.3V power
With 9 output lines
Packing Method : TR

SN74LV595APWR Applications
There are a lot of Texas Instruments SN74LV595APWR Shift Registers applications.

Flash Memory
Sequence generator
Serial-to-parallel data conversion
Delay Line
Counter
LED matrix control
Output expansion
Parallel data
data manipulation
ROM Chips