Texas Instruments SN74HC595NSR

SN74HC595NSR Overview
The device is embedded in 16-SOIC (0.209, 5.30mm Width) package. There are 16 terminations on the chip. This item is packed in case Tape & Reel (TR). The part operates at 5V voltage. 16 pins are present on the device. Using Surface Mount as a mount point is recommended. The electronic component belongs to the HC/UH. Surface Mount is the way this component is mounted. Operating temperatures are within the range of -40°C~85°C. Votage within 2V~6V is supplied. In the 74HC series, this electrical component is found. You can search for similar parts based on the 74HC595 family. 5V is noted as the operating supply voltage of this chip. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There must be a minimum supply voltage (Vsup) of 2V for this part. There are 1 input lines available in the device. It can deliver voltage at 2/6V. This part should not have a supply voltage (Vsup) greater than 6V. It is necessary to operate 9 output lines. It runs with a quiescent current of 8μA. To package the part, TR is used.

SN74HC595NSR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
Quiescent Current at 8μA
Packing Method : TR

SN74HC595NSR Applications
There are a lot of Texas Instruments SN74HC595NSR Shift Registers applications.

Pattern Recognizers
Parallel to serial converter
Data Format Converters
Delay Line
store data in digital form
Data Processors
LED matrix control
data transfer
Dual-rank shift, hold, and bus applications
Data manipulation