Texas Instruments SN74HC374DW

SN74HC374DW Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. -40°C~85°C TAis the operating temperature. The type of this D latch is D-Type. In terms of FPGAs, it belongs to the 74HC series. There should be no greater frequency than 70MHzon its output. In total, it contains 1 elements. There is 8μA quiescent consumption. There have been 20 terminations. If you search by 74HC374, you will find similar parts. A voltage of 5V is used as the power supply for this D latch. There is 3pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as HC/UH. There is an electronic part that is mounted in the way of Surface Mount. There are 20pins on it. This device's clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. As soon as 6Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 2V. The power supply is 2/6V. There are 2 ports embedded in the flip flops. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. The output current of 7.8mA makes it feature maximum design flexibility. As of now, there are 3input lines. Currently, there are 8 channels available.

SN74HC374DW Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies

SN74HC374DW Applications
There are a lot of Texas Instruments SN74HC374DW Flip Flops applications.

Single Up Count-Control Line
Count Modes
Reduced system switching noise
Balanced Propagation Delays
Bounce elimination switch
EMI reduction circuitry
Supports Live Insertion
Power down protection
Buffered Clock
Dynamic threshold performance