SN74ALS323DWRG4

Texas Instruments SN74ALS323DWRG4

Part Number:
SN74ALS323DWRG4
Manufacturer:
Texas Instruments
Ventron No:
3714271-SN74ALS323DWRG4
Description:
IC REGISTER, MULTIPLEXED 20SOIC
ECAD Model:
Datasheet:
SN74ALS323DWRG4

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Texas Instruments SN74ALS323DWRG4 technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments SN74ALS323DWRG4.
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    20-SOIC (0.295, 7.50mm Width)
  • Number of Pins
    20
  • Operating Temperature
    0°C~70°C
  • Packaging
    Tape & Reel (TR)
  • Series
    74ALS
  • Part Status
    Obsolete
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    20
  • Additional Feature
    HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL
  • Technology
    TTL
  • Voltage - Supply
    4.5V~5.5V
  • Terminal Position
    DUAL
  • Terminal Form
    GULL WING
  • Peak Reflow Temperature (Cel)
    NOT SPECIFIED
  • Supply Voltage
    5V
  • Reflow Temperature-Max (s)
    NOT SPECIFIED
  • Base Part Number
    74ALS323
  • Function
    Universal
  • Qualification Status
    Not Qualified
  • Output Type
    Tri-State
  • Operating Supply Voltage
    5V
  • Number of Elements
    1
  • Power Supplies
    5V
  • Propagation Delay
    19 ns
  • Family
    ALS
  • Logic Function
    Shift Register
  • Output Characteristics
    3-STATE
  • Logic Type
    Register, Multiplexed
  • Output Polarity
    TRUE
  • Number of Bits per Element
    8
  • Trigger Type
    POSITIVE EDGE
  • Number of Input Lines
    10
  • Count Direction
    BIDIRECTIONAL
  • Height Seated (Max)
    2.65mm
  • Width
    7.5mm
  • RoHS Status
    ROHS3 Compliant
Description
SN74ALS323DWRG4 Overview
This particular component is manufactured by Texas Instruments and falls under the category of Logic - Shift Registers. It is a chip that is designed for surface mounting and comes in a 20-SOIC package with a width of 0.295 inches or 7.50mm. It is intended to operate within a temperature range of 0°C to 70°C. However, it is important to note that this part is now considered obsolete, meaning it is no longer being produced or supported by the manufacturer. The technology used in this chip is TTL (Transistor-Transistor Logic), and it requires a supply voltage between 4.5V and 5.5V, with a specific supply voltage of 5V. The propagation delay of this chip is 19 nanoseconds, which refers to the time it takes for a signal to propagate through the circuitry. The trigger type for this chip is a positive edge, indicating that it responds to a rising edge signal. Lastly, the count direction of this chip is bidirectional, meaning it can shift data in both directions.

SN74ALS323DWRG4 Features
With 20 pins
Mounted in Surface Mount type.
Based on 74ALS323 family
Operate supply voltage at 5V
It supplies 5V power

SN74ALS323DWRG4 Applications
There are a lot of Texas Instruments SN74ALS323DWRG4 Shift Registers applications.

data transfer
Delay Line
store data in digital form
Data manipulation
LED matrix control
Serial-to-parallel data conversion
Data Processors
Cache memory in CPU
Parallel to serial converter
ROM Chips
SN74ALS323DWRG4 More Descriptions
IC REGISTER, MULTIPLEXED 20SOIC
These 8-bit universal shift/storage registers feature multiplexed input/output (I/O) ports to achieve full 8-bit data handling in a 20-pin package. Two function-select (S0, S1) inputs and two output-enable (OE1, OE2) inputs can be used to choose the modes of operation listed in the function table. Synchronous parallel loading is accomplished by taking both S0 and S1 high. This places the 3-state outputs in the high-impedance state and permits data applied on the I/O ports to be clocked into the register. Reading out of the register can be accomplished while the outputs are enabled in any mode. Clearing occurs synchronously when the clear (CLR) input is low. Taking either OE1 or OE2 high disables the outputs but has no effect on clearing, shifting, or storing data. The SN54ALS323 is characterized for operation over the full military temperature range of -55C to 125C. The SN74ALS323 is characterized for operation from 0C to 70C.
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.