SIC414CD-T1-GE3

• Factory Lead Time
  15 Weeks
• Mount
  Surface Mount
• Mounting Type
  Surface Mount
• Package / Case
  28-WFQFN Exposed Pad
• Number of Pins
  28
• Operating Temperature
  -40°C~85°C
• Packaging
  Tape & Reel (TR)
• Published
  2011
• Series
  microBUCK®
• Part Status
  Active
• Moisture Sensitivity Level (MSL)
  1 (Unlimited)
• Number of Terminations
  44
• ECCN Code
  EAR99
• Voltage - Supply
  3V~28V
• Terminal Position
  QUAD
• Base Part Number
  SIC414
• Pin Count
  44
• JESD-30 Code
  S-XQCC-N44
• Number of Outputs
  2
• Output Voltage
  5.5V
• Max Output Current
  5A
• Voltage - Output 1
  5.5V
• Operating Supply Voltage
  28V
• Analog IC - Other Type
  SWITCHING REGULATOR
• Operating Supply Current
  130μA
• Output Current
  6A
• Max Output Voltage
  5.5V
• Voltage - Output 2
  5V
• Topology
  Step-Down (Buck) Synchronous (1), Linear (LDO) (1)
• Min Input Voltage
  3V
• Frequency - Switching
  200kHz~1MHz
• Max Input Voltage
  28V
• Current - Output 1
  6A
• Min Output Voltage
  750mV
• Current - Output 2
  200mA
• w/Sequencer
  No
• Voltage/Current - Output 1
  0.75V~5.5V 6A
• Voltage/Current - Output 2
  5V 200mA
• Length
  4mm
• REACH SVHC
  No SVHC
• RoHS Status
  ROHS3 Compliant
• Lead Free
  Lead Free

SIC414CD-T1-GE3 Overview
28-WFQFN Exposed Pad packaging is voltage regulators' for voltage regulators' transportation.The shipping of package Tape & Reel (TR) has been completed.Voltage regulator supports a total of 2 outputs.To avoid malfunctioning of the voltage regulator, the operating temperature should be set to -40°C~85°C.To find more pin-to-pin solutions for your specific needs, you can try searching for SIC414.You can find 44 terminals of the voltage regulator 12v.Its pinout begins with 44 pins.To operate this voltage regulator, you will need a voltage of 130μA.Organizing the pins in this voltage regulator in a 28 pattern is the key to its functionality.A voltage output of 5.5V allows it to be used for a diverse range of applications.The input voltage required for this regulator is voltage ≥ 3V.There is a maximum voltage of 28V that can be used with this voltage regulator.There should be an output of 6A from the DC DC Switching Regulator at this time.It is designed to produce as much current 5A as possible at its maximum capacity.It has a Surface Mount for mouting on PCB or other boards.There is a minimum voltage that can be outputted by this controller output, which is 750mV.The maximum voltage that can be output by this voltage regulator is 5.5V voltage.There is a voltage regulator 12v from microBUCK? that is used in this voltage regulator 12v.

SIC414CD-T1-GE3 Features
2 outputs
Operating Temperature: -40°C~85°C

SIC414CD-T1-GE3 Applications
There are a lot of Vishay Siliconix SIC414CD-T1-GE3 Linear Regulator Controllers applications.

High-current, current-limited switch
DVD Player
Microprocessor Power Supply
Monitors
Low noise SMPS post regulator
Voltage References
Low-dropout SMPS post regulator
Motherboards
Low parts count 5.0V to 3.3V computer supply
High Efficiency Linear Regulators