Silicon Labs SI5316-B-GM
- Part Number:
- SI5316-B-GM
- Manufacturer:
- Silicon Labs
- Ventron No:
- 3820279-SI5316-B-GM
- Description:
- IC PREC JITTER ATTENUATOR 36QFN
- Datasheet:
- SI5316-B-GM
Silicon Labs SI5316-B-GM technical specifications, attributes, parameters and parts with similar specifications to Silicon Labs SI5316-B-GM.
- MountSurface Mount
- Mounting TypeSurface Mount
- Package / Case36-VFQFN Exposed Pad
- Number of Pins36
- Operating Temperature-40°C~85°C
- PackagingTube
- Published1997
- SeriesDSPLL®
- Part StatusObsolete
- Moisture Sensitivity Level (MSL)3 (168 Hours)
- Number of Terminations36
- ApplicationsSONET;SDH
- Voltage - Supply1.62V~3.63V
- Terminal PositionQUAD
- Peak Reflow Temperature (Cel)260
- Number of Functions1
- Supply Voltage1.8V
- Terminal Pitch0.5mm
- Reflow Temperature-Max (s)40
- Base Part NumberSI5316
- OutputCML, LVCMOS, LVDS, LVPECL
- Pin Count36
- Operating Supply Voltage3.3V
- Number of Circuits1
- Frequency (Max)710MHz
- InputClock, Crystal
- Ratio - Input:Output3:1
- PLLYes with Bypass
- Differential - Input:OutputYes/Yes
- Divider/MultiplierYes/No
- Height Seated (Max)0.9mm
- Length6mm
- Width6mm
- Radiation HardeningNo
- RoHS StatusRoHS Compliant
SI5316-B-GM Overview
This clock IC is packaged using the Tube method. Clock PLL is embedded in the 36-VFQFN Exposed Pad package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. There are 36 terminations found in the file. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. In this clock generator, Clock, Crystal is used as the input to the clock. A total of 1 circuits are implemented to access the full performance of the electrical part. An upper frequency limit of 710MHz Max can be achieved with this clock-based frequency synthesizer. Surface Mount-slots make it easy to mount this electronic component on panels. Clock generators should operate with the voltage supply of 1.62V~3.63V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. In this case, we are dealing with a frequency synthesizer that can be used with CML, LVCMOS, LVDS, LVPECL logic levels. It has been classified as a Clock Jitter Attenuator electronic part, which means that it is a semiconductor. The clock-generating IC is a 36-bit device designed specifically for microprocessors. The related electronic parts of part number SI5316 are listed below. There is a 36 pin that is available on the digital clock generator. This time clock generator can handle a voltage of 3.3V as its supply voltage. A member of the DSPLL? series, this electronic component is made of plastic. SONET;SDH is a possible application for the clock generators.
SI5316-B-GM Features
Available in the 36-VFQFN Exposed Pad
Supply voltage of 1.8V
Operating supply voltage of 3.3V
SI5316-B-GM Applications
There are a lot of Silicon Labs SI5316-B-GM Clock Generators applications.
Clock signals to the high-speed Digital RF circuits
Televisions
Local oscillator source in receiver
VSAT (Small Ground Satellite Station)
Time to digital converters
Ports
Infotainment systems
Melting
Wireless base station for LTE, LTE-advanced
1 Gigabit Ethernet
This clock IC is packaged using the Tube method. Clock PLL is embedded in the 36-VFQFN Exposed Pad package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. There are 36 terminations found in the file. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. In this clock generator, Clock, Crystal is used as the input to the clock. A total of 1 circuits are implemented to access the full performance of the electrical part. An upper frequency limit of 710MHz Max can be achieved with this clock-based frequency synthesizer. Surface Mount-slots make it easy to mount this electronic component on panels. Clock generators should operate with the voltage supply of 1.62V~3.63V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. In this case, we are dealing with a frequency synthesizer that can be used with CML, LVCMOS, LVDS, LVPECL logic levels. It has been classified as a Clock Jitter Attenuator electronic part, which means that it is a semiconductor. The clock-generating IC is a 36-bit device designed specifically for microprocessors. The related electronic parts of part number SI5316 are listed below. There is a 36 pin that is available on the digital clock generator. This time clock generator can handle a voltage of 3.3V as its supply voltage. A member of the DSPLL? series, this electronic component is made of plastic. SONET;SDH is a possible application for the clock generators.
SI5316-B-GM Features
Available in the 36-VFQFN Exposed Pad
Supply voltage of 1.8V
Operating supply voltage of 3.3V
SI5316-B-GM Applications
There are a lot of Silicon Labs SI5316-B-GM Clock Generators applications.
Clock signals to the high-speed Digital RF circuits
Televisions
Local oscillator source in receiver
VSAT (Small Ground Satellite Station)
Time to digital converters
Ports
Infotainment systems
Melting
Wireless base station for LTE, LTE-advanced
1 Gigabit Ethernet
SI5316-B-GM More Descriptions
Phase Locked Loops - PLL Precision Clock Jitter Attenuator, 1 Output, pin control
Optical Networking Solutions - Precision Clock ICs PRECISION CLK JITTER ATTENUATOR, 1 OUT
Control: Pin; Reference Inputs: 2; Clock Outputs: 1; Input Frequency (MHz): 19-710; Output Frequency (MHz): 19 - 710 MHz; Phase Jitter (RMS): 0.3 ps; Output Format(s): LVPECL, LVDS, CML, LVCMOS; VDD: 1.8, 2.5, 3.3V; VDDO: 1.8, 2.5, 3.3V; Package: 6x6mm 36-QFN
Optical Networking Solutions - Precision Clock ICs PRECISION CLK JITTER ATTENUATOR, 1 OUT
Control: Pin; Reference Inputs: 2; Clock Outputs: 1; Input Frequency (MHz): 19-710; Output Frequency (MHz): 19 - 710 MHz; Phase Jitter (RMS): 0.3 ps; Output Format(s): LVPECL, LVDS, CML, LVCMOS; VDD: 1.8, 2.5, 3.3V; VDDO: 1.8, 2.5, 3.3V; Package: 6x6mm 36-QFN
The three parts on the right have similar specifications to SI5316-B-GM.
-
ImagePart NumberManufacturerMountMounting TypePackage / CaseNumber of PinsOperating TemperaturePackagingPublishedSeriesPart StatusMoisture Sensitivity Level (MSL)Number of TerminationsApplicationsVoltage - SupplyTerminal PositionPeak Reflow Temperature (Cel)Number of FunctionsSupply VoltageTerminal PitchReflow Temperature-Max (s)Base Part NumberOutputPin CountOperating Supply VoltageNumber of CircuitsFrequency (Max)InputRatio - Input:OutputPLLDifferential - Input:OutputDivider/MultiplierHeight Seated (Max)LengthWidthRadiation HardeningRoHS StatusFactory Lead TimeSurface MountWeightJESD-609 CodeTerminal FinishTerminal FormTime@Peak Reflow Temperature-Max (s)Number of OutputsPbfree CodeJESD-30 CodeQualification StatusView Compare
-
SI5316-B-GMSurface MountSurface Mount36-VFQFN Exposed Pad36-40°C~85°CTube1997DSPLL®Obsolete3 (168 Hours)36SONET;SDH1.62V~3.63VQUAD26011.8V0.5mm40SI5316CML, LVCMOS, LVDS, LVPECL363.3V1710MHzClock, Crystal3:1Yes with BypassYes/YesYes/No0.9mm6mm6mmNoRoHS Compliant------------
-
-Surface Mount63-LBGA63-20°C~85°CTray2001DSPLL®Active3 (168 Hours)63SONET;SDH3.135V~3.465VBOTTOM-13.3V--SI5321CML633.3V12.8GHzLVTTL1:1YesYes/Yes--9mm9mmNoRoHS Compliant6 WeeksYES236.094829mge1Tin/Silver/Copper (Sn/Ag/Cu)BALL-----
-
Surface MountSurface Mount36-VFQFN Exposed Pad36-40°C~85°CTube1997DSPLL®Obsolete3 (168 Hours)36SONET;SDH1.62V~3.63VQUAD26011.8V0.5mm-SI5325CML, LVCMOS, LVDS, LVPECL363.3V11.4GHzClock2:2YesYes/Yes-0.9mm6mm6mmNoRoHS Compliant------402---
-
Surface MountSurface Mount36-VFQFN Exposed Pad--40°C~85°CTube1997DSPLL®Obsolete3 (168 Hours)36-1.62V~3.63VQUAD260--0.5mm40SI5326CML, LVCMOS, LVDS, LVPECL363.3V1346MHzLVCMOS, LVDS, LVPECL, Crystal3:2YesYes/Yes-0.9mm6mm6mm-RoHS Compliant-----NO LEAD-2yesS-XQCC-N36Not Qualified
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
27 November 2023
TL082 Operational Amplifier Equivalents, Features, TL072 vs TL082 and Applications
Ⅰ. Overview of TL082 operational amplifierⅡ. Features of TL082 operational amplifierⅢ. Pin configuration of TL082 operational amplifierⅣ. How does the output short-circuit protection function of TL082 work?Ⅴ. Functional... -
27 November 2023
BT151 SCR Features, Pin Configuration, Working Principle and Applications
Ⅰ. What is a one-way thyristor?Ⅱ. Overview of BT151Ⅲ. What are the features of BT151?Ⅳ. Footprint and pin configuration of BT151Ⅴ. Technical parameters of BT151Ⅵ. How to measure... -
28 November 2023
An Introduction to LM393 Low Power Dual Voltage Comparator
Ⅰ. What is LM393 comparator?Ⅱ. What are the features of LM393 comparator?Ⅲ. Pin configuration of LM393 comparatorⅣ. Functions of LM393 comparatorⅤ. Technical parameters of LM393 comparatorⅥ. Typical circuit... -
28 November 2023
Get to Know the TL494 Pulse-Width-Modulation Control Circuits
Ⅰ. Overview of TL494Ⅱ. What are the features of TL494?Ⅲ. TL494 symbol, footprint and pin configurationⅣ. Internal structure and working parts of TL494Ⅴ. How does the TL494 work?Ⅵ....
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.