PI6C4911506LIE
Share:

Diodes Incorporated PI6C4911506LIE

Part Number:
PI6C4911506LIE
Manufacturer:
Diodes Incorporated
Ventron No:
2974521-PI6C4911506LIE
Description:
IC CLOCK BUFFER 1:6 20TSSOP
ECAD Model:
Datasheet:
PI6C4911506LIE
Payment:
Payment
Delivery:
Delivery

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Part Overview
Description
Highperformance fanout buffer device
Supports up to 1.5GHz frequency
Ideal for distributing lowjitter clock signals to multiple destinations

Features
6 LVPECL outputs
Ultralow additive phase jitter: <0.03 ps (typ)
Single differential input
Low delay from input to output (Tpd typ. < 800ps)
2.5V/3.3V power supply
Industrial temperature support
TSSOP20 package

Applications
Networking systems (switches, routers)
Highfrequency backplanebased computing and telecom platforms
Specifications
Diodes Incorporated PI6C4911506LIE technical specifications, attributes, parameters and parts with similar specifications to Diodes Incorporated PI6C4911506LIE.
  • Factory Lead Time
    20 Weeks
  • Mount
    Surface Mount
  • Mounting Type

    Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include: * Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side. * Surface-mount: Component is placed on the surface of the PCB and soldered in place. * Press-fit: Component is pressed into place on the PCB without soldering. * Socket: Component is inserted into a socket on the PCB, allowing for easy replacement. The mounting type is determined by factors such as the component's size, shape, and power requirements.

    Surface Mount
  • Package / Case

    Package / Case refers to the physical housing or enclosure that encapsulates an electronic component. It provides protection, facilitates handling, and enables electrical connections. The package type determines the component's size, shape, pin configuration, and mounting options. Common package types include DIP (dual in-line package), SOIC (small outline integrated circuit), and BGA (ball grid array). The package also influences the component's thermal and electrical performance.

    20-TSSOP (0.173, 4.40mm Width)
  • Operating Temperature

    Operating Temperature is the range of temperatures at which an electronic component can function properly. It is typically specified in degrees Celsius (°C) and indicates the minimum and maximum temperatures at which the component can operate without experiencing damage or degradation. Operating Temperature is an important parameter to consider when designing electronic circuits, as it ensures that the components will function reliably in the intended operating environment.

    -40°C~85°C
  • Packaging
    Tube
  • Published
    2016
  • Part Status

    Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.

    Active
  • Moisture Sensitivity Level (MSL)

    Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.

    1 (Unlimited)
  • Number of Terminations
    20
  • ECCN Code
    EAR99
  • Additional Feature
    ALSO OPERATES AT 3 TO 3.6 V SUPPLY
  • Voltage - Supply
    2.375V~3.6V
  • Terminal Position
    DUAL
  • Terminal Form
    GULL WING
  • Peak Reflow Temperature (Cel)
    NOT SPECIFIED
  • Number of Functions
    1
  • Supply Voltage

    Supply Voltage is the voltage required to power an electronic component. It is typically measured in volts (V) and is specified in the component's datasheet. The supply voltage must be within the specified range for the component to function properly. If the supply voltage is too low, the component may not function at all. If the supply voltage is too high, the component may be damaged.

    2.5V
  • Terminal Pitch
    0.65mm
  • Reflow Temperature-Max (s)
    NOT SPECIFIED
  • Output
    LVPECL
  • JESD-30 Code
    R-PDSO-G20
  • Supply Voltage-Max (Vsup)
    2.625V
  • Supply Voltage-Min (Vsup)
    2.375V
  • Number of Circuits

    Number of Circuits refers to the number of independent signal paths within an electronic component. It indicates how many separate circuits or channels the component can handle simultaneously. For example, an operational amplifier with a Number of Circuits of 2 can amplify two separate input signals independently. This parameter is crucial for determining the component's functionality and its suitability for specific applications.

    1
  • Frequency (Max)
    1.5GHz
  • Family
    6C
  • Input
    CMOS, LVDS, LVPECL
  • Ratio - Input:Output
    1:6
  • Differential - Input:Output
    Yes/Yes
  • Propagation Delay (tpd)
    0.7 ns
  • Same Edge Skew-Max (tskwd)
    0.05 ns
  • Length

    Length, in the context of electronic components, refers to the physical dimension of a component along its longest axis. It is typically measured in millimeters (mm) or inches (in). Length is a crucial parameter for determining the physical size and space requirements of a component on a printed circuit board (PCB) or other assembly. It also affects the component's electrical characteristics, such as inductance and capacitance, which can be influenced by the length of conductors or traces within the component.

    6.5mm
  • Width
    4.4mm
  • RoHS Status
    ROHS3 Compliant
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.