Linear Technology OP15FN8#PBF

Name: OP15FN8#PBF
Brand: Linear Technology
SKU: 3191348-OP15FN8#PBF
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: OP15FN8#PBF

Manufacturer:: Linear Technology

Ventron No:: 3191348-OP15FN8#PBF

Description:: IC OPAMP JFET 5.7MHZ 8DIP

ECAD Model:

Datasheet:: OP15FN8#PBF

Specifications

Linear Technology OP15FN8#PBF technical specifications, attributes, parameters and parts with similar specifications to Linear Technology OP15FN8#PBF.

Factory Lead Time
8 Weeks
Mounting Type
Through Hole
Package / Case
8-DIP (0.300, 7.62mm)
Operating Temperature
0°C~70°C
Packaging
Tube
Published
2006
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Base Part Number
OP15
Number of Circuits
1
Current - Supply
2.7mA
Slew Rate
11V/μs
Amplifier Type
J-FET
Current - Input Bias
30pA
Voltage - Supply, Single/Dual (±)
±10V~18V
Gain Bandwidth Product
5.7MHz
Voltage - Input Offset
400μV
RoHS Status
ROHS3 Compliant

Description

OP15FN8#PBF Overview
A 8-DIP (0.300, 7.62mm) case is used to package the op amp. J-FET-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . On this instrumentation amplifier, there are 1 circuits that are connected together. As a recommendation, this electronic component should be used with a power supply that can deliver 2.7mA.

OP15FN8#PBF Features

OP15FN8#PBF Applications
There are a lot of Linear Technology/Analog Devices
OP15FN8#PBF Instrumentational OP Amps applications.

Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement

OP15FN8#PBF More Descriptions

Op Amp Single High Speed Amplifier ±22V 8-Pin PDIP N
Audio Amplifiers High Perf JFET Op Amp
The PMI JFET-input series of devices offer clear advantages over industry-generic devices and are superior in both cost and performance to many dielectrically-isolated and hybrid op amps. All devices offer offset voltages as low as 0.5mV with TCVOS guaranteed to 5µV/°C. A unique input bias cancellation circuit reduces the IB by a factor of 10 over convential designs. In addition, PMI specifies 1B and IOS with the devices warmed up and operating at 25°C ambient. These devices were designed to provide real precision performance along with high speed. Although they can be nulled, the design objective was to provide low offset-voltage without nulling. Systems generally become more cost effective as the number of trim circuits is decreased. PMI achieves this performance by use of an improved Bipolar compatible JFET process coupled with ono-chip, zener-zap offset trimming.

Certification