ON Semiconductor NCP1072P065G

NCP1072P065G Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .Tube case is available for the ac dc converter.The AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~125°C TJ °C in order for it to perform properly.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.When the switching frequency reaches 65kHz , the process is complete.The AC/DC converter is capable of being used when the supply voltage is 6.3V~10V (Vcc/Vdd).A total of 7 terminations have been recorded.On the ac/dc converter, there are 7 pins.There are 7 pins in total.Through Hole is the recommended mounting method for the ac dc converters.If you select the NCP1072 family, you will be able to search similar acdc converters.The number of outputs to run is 1 .The following ac to dc conversions are contained in Switching Regulator or Controllers .We are setting the output current to 250mA .Here is the standard for REACH SVHC : No SVHC .Input voltages under 10V can be used to power the AC to DC converter.There is 19W output power generated by a coverter.A voltage of less than -300mV V can be used with the AC to DC inverter.Input voltage (AC) should be below 250V .There is a Adjustable output configured.

NCP1072P065G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
Output Current at 250mA
Output Type : Adjustable

NCP1072P065G Applications
There are a lot of ON Semiconductor NCP1072P065G AC DC Converters applications.

Rice Cooker
Chargers for cell/cordless phones
Vacuum Cleaner
Home appliances
IoT Applications
Consumer electronics
Adapter/Charger for Cordless Phones
Standby power supplies for IR
Industrial controls
Lighting controls