MIC47100-10YMME

• Factory Lead Time
  8 Weeks
• Mount
  Surface Mount
• Mounting Type
  Surface Mount
• Package / Case
  8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
• Number of Pins
  8
• Supplier Device Package
  8-MSOP-EP
• Operating Temperature
  -40°C~125°C
• Packaging
  Tube
• Part Status
  Active
• Moisture Sensitivity Level (MSL)
  3 (168 Hours)
• Max Operating Temperature
  125°C
• Min Operating Temperature
  -40°C
• Base Part Number
  MIC47100
• Number of Outputs
  1
• Voltage - Input (Max)
  3.6V
• Output Voltage
  1V
• Output Type
  Fixed
• Max Output Current
  1A
• Polarity
  Positive
• Output Configuration
  Positive
• Current - Output
  1A
• Control Features
  Enable
• Voltage - Output (Min/Fixed)
  1V
• Number of Regulators
  1
• Min Input Voltage
  1V
• Protection Features
  Over Current, Over Temperature, Under Voltage Lockout (UVLO)
• Current - Quiescent (Iq)
  6μA
• Voltage Dropout (Max)
  0.25V @ 1A
• Max Input Voltage
  3.6V
• PSRR
  80dB ~ 45dB (1kHz ~ 500kHz)
• Dropout Voltage
  80mV
• Min Output Voltage
  1V
• Min Current Limit
  1.1A
• Output Voltage Accuracy
  1.5 %
• RoHS Status
  ROHS3 Compliant
• Lead Free
  Lead Free

MIC47100-10YMME Overview
An Tube case is included with the delivery. Packaging of the Liner regulator IC takes the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. The IC chip's output type is Fixed. The electronic component implements 1 Voltage regulator ICs. Surface Mount operating temperature varies depending on the IC Voltage Regulator. The IC voltage regulator must be maintained at -40°C~125°C degrees for it to function. As you can see, this regulator's output function is configured to be Positive. There is an 1Amp current output on this voltage regulator IC. In order to deliver prompt, sufficient and reliable performance, this regulator IC has 1 outputs in total. Its dropout voltage is 10 volts. There are 8 pins on the chip. For your information, the basic part number for this regulator IC is MIC47100. It works in 1A output current at mostAs a general rule, it is recommended that you use the IC voltage regulator when temperatures are below 125°C degrees Celsius. At the very least, the voltage regulator IC works with a -40°C operating temperature.

MIC47100-10YMME Features
80mV dropout voltage
The maximum operating temperature of -40°C

MIC47100-10YMME Applications
There are a lot of Microchip Technology MIC47100-10YMME Linear Voltage Regulators applications.

VCO (Voltage-Controlled Oscillator)
SMPS (Switching-Mode Power Supply)
Communication device
Medical Applications: Diagnostics and Imaging
eBike
Ethernet condition monitoring vibration sensor
Car wiper
Engine cooling fan
Video equipment
Engine management